Topic: ASICPuppy.net - Terminus, Moonlander 2, 2pacs in Stock! BTC,LTC,ETH,BCH - page 34. (Read 105180 times)

Quote from: mstrongbow on June 03, 2014, 07:27:44 PM

I've got an even easier solution for you. Run the installer package from my second post. I have a dialog with a drop down for frequency. Cgminer is installed and configured for you and a shortcut created on the desktop and in the start menu.

Yes, I used that for initial install...so I should re-run the install every time I want to change Frequency?

Sorry, didn't realize that. No, the default install dir is under program files\cgminer. Edit cg.cmd and modify the last string. Rockminer does not recommend going over 290.

Word and thanks mate! I am really digging my R-Box so far. Sweet little unit with huge potential

That did not work. I changed the setting from 270 up to 290 and restarted cgminer but it still only reports 270 Freq in cgminer
Tried changing to another value and also right-click and run as admin on cg.cmd to no avail.

Any suggestions?

Just read https://github.com/rockminerinc/cgminer-for-R-BOX/blob/master/handbook.md but still nothing

It looks like I have the same thing on windows but not my beaglebone. It's probably an issue with rockminer's compile of cgminer for Windows. I'll look at it a bit more tonight.

mstrongbow

sr. member

Activity: 322

Merit: 250

3D Printed!

Quote from: CrazyGuy on June 03, 2014, 07:06:36 PM

Quote from: mstrongbow on June 03, 2014, 06:58:35 PM

Quote from: CrazyGuy on June 03, 2014, 07:06:36 PM

I've got an even easier solution for you. Run the installer package from my second post. I have a dialog with a drop down for frequency. Cgminer is installed and configured for you and a shortcut created on the desktop and in the start menu.

Yes, I used that for initial install...so I should re-run the install every time I want to change Frequency?

Sorry, didn't realize that. No, the default install dir is under program files\cgminer. Edit cg.cmd and modify the last string. Rockminer does not recommend going over 290.

Word and thanks mate! I am really digging my R-Box so far. Sweet little unit with huge potential

That did not work. I changed the setting from 270 up to 290 and restarted cgminer but it still only reports 270 Freq in cgminer
Tried changing to another value and also right-click and run as admin on cg.cmd to no avail.

Any suggestions?

Just read https://github.com/rockminerinc/cgminer-for-R-BOX/blob/master/handbook.md but still nothing

mstrongbow

sr. member

Activity: 322

Merit: 250

3D Printed!

Quote from: mstrongbow on June 03, 2014, 06:58:35 PM

Quote from: mstrongbow on June 03, 2014, 06:58:35 PM

I've got an even easier solution for you. Run the installer package from my second post. I have a dialog with a drop down for frequency. Cgminer is installed and configured for you and a shortcut created on the desktop and in the start menu.

Yes, I used that for initial install...so I should re-run the install every time I want to change Frequency?

Sorry, didn't realize that. No, the default install dir is under program files\cgminer. Edit cg.cmd and modify the last string. Rockminer does not recommend going over 290.

Word and thanks mate! I am really digging my R-Box so far. Sweet little unit with huge potential

CrazyGuy

legendary

Activity: 1973

Merit: 1007

I've got an even easier solution for you. Run the installer package from my second post. I have a dialog with a drop down for frequency. Cgminer is installed and configured for you and a shortcut created on the desktop and in the start menu.

Yes, I used that for initial install...so I should re-run the install every time I want to change Frequency?

Sorry, didn't realize that. No, the default install dir is under program files\cgminer. Edit cg.cmd and modify the last string. Rockminer does not recommend going over 290.

mstrongbow

sr. member

Activity: 322

Merit: 250

3D Printed!

I've got an even easier solution for you. Run the installer package from my second post. I have a dialog with a drop down for frequency. Cgminer is installed and configured for you and a shortcut created on the desktop and in the start menu.

Yes, I used that for initial install...so I should re-run the install every time I want to change Frequency?

philipma1957

legendary

Activity: 4116

Merit: 7849

'The right to privacy matters'

Quote from: mstrongbow on June 03, 2014, 04:44:36 PM

I've got an even easier solution for you. Run the installer package from my second post. I have a dialog with a drop down for frequency. Cgminer is installed and configured for you and a shortcut created on the desktop and in the start menu.

good I will test it with 3 or 4 frequencies.. I am hoping these will do close to 1 watt 1 gh with a plat psu on the correct freq.

My goal would be to sell sets of two on ebay with a usb stick like this

http://www.amazon.com/gp/product/B00EF3GVAG/ref=oh_details_o08_s00_i01?ie=UTF8&psc=1

power adapter like this.

http://www.amazon.com/gp/product/B00JG7AGDY/ref=oh_details_o05_s00_i00?ie=UTF8&psc=1

the usb stick would have software that would

1) allow one to solo mine and one to run at a pool
2) both to solo mine
3) both to run at pools

CrazyGuy

legendary

Activity: 1973

Merit: 1007

I've got an even easier solution for you. Run the installer package from my second post. I have a dialog with a drop down for frequency. Cgminer is installed and configured for you and a shortcut created on the desktop and in the start menu.

mstrongbow

sr. member

Activity: 322

Merit: 250

3D Printed!

Yo! Got my R-Box the other day. Fantastic packaging! Quick shipping as well, thanks!
Just got mine up and running with minimal effort.

I was wondering how to change the FREQ settings on these units? I have plenty Amps/Watts to spare and want to see what these will do when pushed!

Thanks again mate!

Think I found what I needed in an earlier post...

Quote from: CrazyGuy on May 17, 2014, 01:15:13 AM

4) Optionally, you can add "--anu-freq XXX" as a parameter for overclocking. Replace XXX with current valid clock values of 270-290

I am running Win7 x64. I can enter --anu-freq XXX anywhere in the config file? I have minimal experience using cgminer, so any tips would be appreciated. I use MultiMiner and will most likely supply the developer an R-Box unit for integrating control into MultiMiner, if possible as MM uses BFGminer. One can hope!

philipma1957

legendary

Activity: 4116

Merit: 7849

'The right to privacy matters'

Quote from: CanaryInTheMine on June 03, 2014, 01:25:03 PM

Quote from: bobsag3 on June 03, 2014, 11:41:29 AM

Quote from: bobsag3 on June 03, 2014, 11:41:29 AM

Using a "no name generic" 12V 6A power brick, my Rbox is using 39 watts at the wall for the stock speed of 32GH/s (i.e. 270M for the frequency). Works quietly and seems reliable with the Raspberry Pi and cgminer for support.

Thanks for the feedback. I still owe you guys a test with a standard ATX power supply. Hopefully I can get to that in the next few days.

I have had great luck using this with my R-Boxes
http://minersource.net/products/atx-to-dc-power-adapter

thanks!! was looking for something like this for some time now...

I have a lot of these

http://www.amazon.com/gp/product/B00JG7AGDY/ref=oh_details_o05_s00_i00?ie=UTF8&psc=1

I ran the gridseeds 5 chip units with them.
I will be able to run a direct db sound level with a good sound meter.
I will measure the gridseed and measure the rockminer.
If you don't have any power equipment at all.

I will compare 3 or 4 atx psu's .
I will compare a few bricks.
I will compare this psu.

brick:

http://www.amazon.com/gp/product/B0023Y9EQC/ref=oh_details_o09_s00_i00?ie=UTF8&psc=1

psu:

http://www.amazon.com/gp/product/B00JG5LSN8/ref=oh_details_o02_s00_i00?ie=UTF8&psc=1
http://www.amazon.com/gp/product/B0064LWI40/ref=oh_details_o01_s00_i00?ie=UTF8&psc=1
http://www.amazon.com/gp/product/B00D7CWSCG/ref=oh_details_o04_s00_i00?ie=UTF8&psc=1

http://www.rakuten.com/prod/evga-supernova-1300-g2-1300w-power-supply-110-v-ac-220-v-ac-input/249973555.html

I had bobsag3's psu but sold it with an antminer.

mstrongbow

sr. member

Activity: 322

Merit: 250

3D Printed!

Yo! Got my R-Box the other day. Fantastic packaging! Quick shipping as well, thanks!
Just got mine up and running with minimal effort.

I was wondering how to change the FREQ settings on these units? I have plenty Amps/Watts to spare and want to see what these will do when pushed!

Thanks again mate!

CanaryInTheMine

donator

Activity: 2352

Merit: 1060

between a rock and a block!

Quote from: bobsag3 on June 03, 2014, 11:41:29 AM

Using a "no name generic" 12V 6A power brick, my Rbox is using 39 watts at the wall for the stock speed of 32GH/s (i.e. 270M for the frequency). Works quietly and seems reliable with the Raspberry Pi and cgminer for support.

Thanks for the feedback. I still owe you guys a test with a standard ATX power supply. Hopefully I can get to that in the next few days.

I have had great luck using this with my R-Boxes
http://minersource.net/products/atx-to-dc-power-adapter

thanks!! was looking for something like this for some time now...

CrazyGuy

legendary

Activity: 1973

Merit: 1007

Using a "no name generic" 12V 6A power brick, my Rbox is using 39 watts at the wall for the stock speed of 32GH/s (i.e. 270M for the frequency). Works quietly and seems reliable with the Raspberry Pi and cgminer for support.

Thanks for the feedback. I still owe you guys a test with a standard ATX power supply. Hopefully I can get to that in the next few days.

I have had great luck using this with my R-Boxes
http://minersource.net/products/atx-to-dc-power-adapter

That's pretty cool. Beats making a bunch of molex connectors.

bobsag3

hero member

Activity: 546

Merit: 500

Owner, Minersource.net

Using a "no name generic" 12V 6A power brick, my Rbox is using 39 watts at the wall for the stock speed of 32GH/s (i.e. 270M for the frequency). Works quietly and seems reliable with the Raspberry Pi and cgminer for support.

Thanks for the feedback. I still owe you guys a test with a standard ATX power supply. Hopefully I can get to that in the next few days.

I have had great luck using this with my R-Boxes
http://minersource.net/products/atx-to-dc-power-adapter

philipma1957

legendary

Activity: 4116

Merit: 7849

'The right to privacy matters'

Using a "no name generic" 12V 6A power brick, my Rbox is using 39 watts at the wall for the stock speed of 32GH/s (i.e. 270M for the frequency). Works quietly and seems reliable with the Raspberry Pi and cgminer for support.

Thanks for the feedback. I still owe you guys a test with a standard ATX power supply. Hopefully I can get to that in the next few days.

you want me to do the testing I have a lot of psu's and I have the gridseed pcie cords.

shoot me a pm. my interest has perked up a bit on these if a brick can do 39 watts and 32 gh. a psu can do a lot better.

I would buy 2 and do a 5 or 6 picture printout on this thread.

I wonder if you could do 2 at 64 gh and 66- 70 watts on a good psu.

A miner could send one to a small easy pool like bitminter and use the other for solo mining.

CrazyGuy

legendary

Activity: 1973

Merit: 1007