Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux) - page 1077.

WhyMe

sr. member

Activity: 661

Merit: 250

Quote from: Claymore on October 27, 2016, 02:48:13 AM

Quote from: WhyMe on October 26, 2016, 10:13:02 PM

Somebody to explain me how grabing information from miner works ?

http://ip:3333 give me few json and miner output.
But how get full miner info in json format ? Is it possible ?

Thanks

Added to FAQ:

- How can I get stats from miner as EthMan does?
Start EthMan and catch its tcp/ip data with WireShark, you will see json protocol details.

Finally found miner_getstat1 call.

Ale-x

newbie

Activity: 36

Merit: 0

Why only one is interested in higher hashrates with Claymore's miner? And personally the author hasn't interested in this case?
The miner is realy sends more shares to pool, even for both coin - ETH & SIA, and pools accepted it. There were no HW errors. Clocks are the same.

R9 270 - 15-16 MH/s
7950/7970 about 22 MH/s

fredeq

legendary

Activity: 1537

Merit: 1005

Quote from: 74K50N on October 27, 2016, 04:28:37 AM

whats the best altcoin to dual mine ? i mine ether and sia with amd rigs.

If you do not welcome the extra heat I would actually mine solo.

Personally I choose decred, but many people prefer sia...
DCR - small heat addition, small revenue addition
SIA - moderate heat addition, moderate revenue addition (I dont like the increased power here)
LBC - small heat addition, moderate revenue addition, reduced ETH hashrate (I dont like the reduced hashrate here)

74K50N

newbie

Activity: 3

Merit: 0

whats the best altcoin to dual mine ? i mine ether and sia with amd rigs.

CoRpO

full member

Activity: 185

Merit: 100

Quote from: ?? on ??

Quote from: CoRpO on October 26, 2016, 02:23:41 AM

Quote from: ?? on ??

I have trouble with the remote manager(ethman.exe). It allow me to view static on the computer I turn on the program but not other computer in my LAN (through web browser and the android app won't work either). I already allowed the program on windows 10 firewall both private and public but it doesn't work. However, when I turn off the firewall, it works fine. Anyone know how to add exception to the program without turn off the firewall ?

Did you allow the tcp port 3333 ? It's a better way to proceed IMHO

Just curious, the HTTP port open at 8000, why allow 3333? Anyway, I tried and not work as well.

Add: I ran on some researching and found out that the HTTP port at 8000 already used by another program. I changed to higher port and it works like charm. Thank you for responding ^^

I didn't understand that your were willing to access ethman http server, sorry

Claymore

donator

Activity: 1610

Merit: 1325

Miners developer

Quote from: WhyMe on October 26, 2016, 10:13:02 PM

Somebody to explain me how grabing information from miner works ?

http://ip:3333 give me few json and miner output.
But how get full miner info in json format ? Is it possible ?

Thanks

Added to FAQ:

- How can I get stats from miner as EthMan does?
Start EthMan and catch its tcp/ip data with WireShark, you will see json protocol details.

WhyMe

sr. member

Activity: 661

Merit: 250

Somebody to explain me how grabing information from miner works ?

http://ip:3333 give me few json and miner output.
But how get full miner info in json format ? Is it possible ?

Thanks

deadsix

hero member

Activity: 751

Merit: 517

Fail to plan, and you plan to fail.

Quote from: igotek on October 26, 2016, 05:04:52 PM

Only ETH mode gives 32.8 Mh/s for overclocked R9 390X.
ETH + DCR mode gives 30.1 Mh/s ETH + 440 Mh/s DCR for the same graphic card.

As I see in your readme file, I will get higher hashrate if I use dual mode. But it s not. Is it possible ?

Reduce your -dcri to 1 for claymore's miner ( for 440MH in DCR it must be around 30 currently) and you will see your cards max ETH hash rate which should be around 34 Mh/s. Then increase dcri steadily till you start losing ETH hash rate, find the optimum balance point where you get almost your max ETH hash but also significant DCR. This point should be between -dcri 16 to 24.

omnik

sr. member

Activity: 569

Merit: 250

Did anyone had this kind of error?
Not sure whats causing this and how to fix...

Tnx!

igotek

hero member

Activity: 2086

Merit: 608

Online Security & Investment Corporation

Only ETH mode gives 32.8 Mh/s for overclocked R9 390X.
ETH + DCR mode gives 30.1 Mh/s ETH + 440 Mh/s DCR for the same graphic card.

As I see in your readme file, I will get higher hashrate if I use dual mode. But it s not. Is it possible ?

kirilvvbg

full member

Activity: 213

Merit: 100

Does anybody knows how to fix the following problem:
While the Claymore miner is trying to create/mount the DAG file on one of my cards (R7 370), driver crashes every time. I have noticed in GPU-Z that on this particular, the card memory usage of 17XX MB is not on Dedicated part, but on Dynamic. And may be this is the problem - but I don't know how to fix it. Do you think that simple reinstall of drivers (15.12) would help? Or else?
Thanks.

Ursul0

sr. member

Activity: 857

Merit: 262

Quote from: restless on October 25, 2016, 04:30:49 AM

A problem testing single 470 (XFX 4GB) on Win 7 SP1
Tried drivers 16.9.1 and 16.10.2, same result:

Code:

868	OpenCL platform: AMD Accelerated Parallel Processing
868	OpenCL initializing...
868	AMD Cards available: 1 
868	GPU #0: Ellesmere, 3072 MB available, 32 compute units
868	POOL/SOLO version
868	b240 
868	Platform: Windows
868	start building OpenCL program...

and crash

Yes, it says 3072MB 0-o, altho all other programs (GPUZ, afterburner) say 4096MB ...

Any ideas? Tried even -lidag 3, no change
The system is low powered Sempron with 2GB ram, but I have another rig with 4 7950s running with same configuration Sad

for this card you need 4GB system RAM minimum

z0n0

legendary

Activity: 1274

Merit: 1006

How do I disable CrossFire Huh

http://imgur.com/a/gI17q

amirheavy666

full member

Activity: 228

Merit: 101

NEM (XEM) Top Coin

Quote from: Ale-x on October 26, 2016, 05:56:05 AM

My Gigabyte R9 270 2Gb with core/mem 1050/1500 are mining ETH at 15 MH/s and SIA 264 MH/s
Claymore DualMiner 7.3.
http://www.imgup.cz/image/LAdF

Ask me how! Grin

How ??!!

Ale-x

newbie

Activity: 36

Merit: 0

My Gigabyte R9 270 2Gb with core/mem 1050/1500 are mining ETH at 15 MH/s and SIA 264 MH/s
Claymore DualMiner 7.3.
http://www.imgup.cz/image/LAdF

Ask me how! Grin

CoRpO

full member

Activity: 185

Merit: 100

Quote from: ?? on ??

I have trouble with the remote manager(ethman.exe). It allow me to view static on the computer I turn on the program but not other computer in my LAN (through web browser and the android app won't work either). I already allowed the program on windows 10 firewall both private and public but it doesn't work. However, when I turn off the firewall, it works fine. Anyone know how to add exception to the program without turn off the firewall ?

Did you allow the tcp port 3333 ? It's a better way to proceed IMHO

rawbert

full member

Activity: 199

Merit: 100

Quote from: ?? on ??

I have trouble with the remote manager(ethman.exe). It allow me to view static on the computer I turn on the program but not other computer in my LAN (through web browser and the android app won't work either). I already allowed the program on windows 10 firewall both private and public but it doesn't work. However, when I turn off the firewall, it works fine. Anyone know how to add exception to the program without turn off the firewall ?

I have the same issue on one of my rigs.. would love to know the solution.

Claymore

donator

Activity: 1610

Merit: 1325

Miners developer

Quote from: osnwt on October 25, 2016, 04:41:36 PM

But it still isn't supported (ignored) on Linux with amdgpu-pro drivers in 7.3? Without it not a lot of sense to switch for me.

Yes currently this option is ignored in Linux.

osnwt

sr. member

Activity: 353

Merit: 251

Quote from: Claymore on October 25, 2016, 03:56:45 PM

Quote from: dudee on October 25, 2016, 03:01:03 PM

UNKNOWN OPTION -cvddc
UNKNOWN OPTION 950,

means its not working on rx470?

Means your command line is incorrect, probably missed parameter value, for example "-tt" instead of "-tt 80".

But it still isn't supported (ignored) on Linux with amdgpu-pro drivers in 7.3? Without it not a lot of sense to switch for me.

Claymore

donator

Activity: 1610

Merit: 1325

Miners developer

Quote from: dudee on October 25, 2016, 03:01:03 PM

UNKNOWN OPTION -cvddc
UNKNOWN OPTION 950,

means its not working on rx470?

May be you use old version of the miner?

Topic: Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux) - page 1077. (Read 6590565 times)