^I would like to add only this:
try, the worst case scenario is that you will run again your rig on windows, so there's nothing to lose here, a ~10 min job per rig, to test another way to do it
Topic: Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux) - page 11. (Read 6590757 times)
November 30, 2020, 08:21:23 AM
November 30, 2020, 07:58:29 AM
i really donno why you are struggling with windows os when is so simple on linux distros, and there's still no issue with the 4gb dag size at this point
just try it, make an USB, and let it run for a day, than you'll see the difference on your example
you have nothing to lose
just try it, make an USB, and let it run for a day, than you'll see the difference on your example
you have nothing to lose
And how long you have no problems with your 4gb cards on linux? right around 1 month. So why i should change my OS to linux for 4 weeks? right senseless.
Windows is more userfriendly, Windows is stable as Linux, Windows use less electricity and there are much more things. It is a religion question, but i can´t hear this fucking linux guy´s anymore: "linux is the best, stupid windows, we can´t stop windows updates" and so on
And by the way i use windows and linux.
For older cards it is impossible to get high speed under windows. For example with 390 you get 17 Mh, with 280x 9Mh. The problem is that with the increase of the dag file, windows drivers can't handle this well. There are multiple plug and play OS using linux kernels. Some of them are free, others have 2-3$ cost per month. With them I get 30Mh for 390 and 28 Mh for 280x.
Regarding the new cards. I used to have windows 10 rigs for 3-4 years. First of all, it takes several days, if not weeks to install everything and tune the cards. I had so many problems with crashes that damaged windows files, not to mention the updates, which for the most part can be turned off, but it is another week of wasted time digging into the registry and finding the right tool with google. And one day the windows of one of my rigs died completely. I had ssd which shouldn't get bad sectors, but there were some serious mistakes on the boot and system files that no tool available could repair. I lost several days trying to recover windows with no luck. In the past I've recovered the system may be 10 times but not this time. Then I decided to look for linux based system. Found smos, read about it for 1 hour, installed on a flash for 15 mins, put it in the rig and voilà! It worked! Then I needed only 15 mins to OC the cards and boost them with the tools of this OS. So I switched all my rigs to smos. I have also rigs with HiveOs - somewhat more complicated but free for one rig on any pool, or for several rigs if mining on hiveos pool.
These OS are regularly updated and you have all available miners to test, while it will take much longer to find them googling. So it is not only about the 1 month extra time for 4Gb cards. Although it matters a lot for those who make (tens or hundreds of) thousands per month, since eth is over 2x more profitable than the rest coins after the etc fork. And of course with the browser I have complete control of the rigs and the cards. I can flash their bioses with ease, etc... There is just no reason to mine with windows, unless one has the newest cards and for some reason it can't be tuned with the existing linux OS's. (I know also about ethos, raveos and others but I haven't tried them all.)
November 30, 2020, 07:31:21 AM
i really donno why you are struggling with windows os when is so simple on linux distros, and there's still no issue with the 4gb dag size at this point
just try it, make an USB, and let it run for a day, than you'll see the difference on your example
you have nothing to lose
just try it, make an USB, and let it run for a day, than you'll see the difference on your example
you have nothing to lose
And how long you have no problems with your 4gb cards on linux? right around 1 month. So why i should change my OS to linux for 4 weeks? right senseless.
Windows is more userfriendly, Windows is stable as Linux, Windows use less electricity and there are much more things. It is a religion question, but i can´t hear this fucking linux guy´s anymore: "linux is the best, stupid windows, we can´t stop windows updates" and so on
And by the way i use windows and linux.
November 30, 2020, 07:04:18 AM
i really donno why you are struggling with windows os when is so simple on linux distros, and there's still no issue with the 4gb dag size at this point
just try it, make an USB, and let it run for a day, than you'll see the difference on your example
you have nothing to lose
just try it, make an USB, and let it run for a day, than you'll see the difference on your example
you have nothing to lose
November 30, 2020, 06:20:48 AM
Did anyone tried claymore on new ETChash algorithm? maybe it works..
November 29, 2020, 05:23:39 PM
It looks like we cannot use claymore miner after 1 or 2 dags.
Best thing about this miner is -straps command, i will probably change my miner, my question is 'is there any other miner which i can use -straps command, my cards are amd rx 570&470 8 gb
Second question;
I tried a lot of rom for my cards but every time i had a problem, how can i find which straps claymore is using, so i can flash my cards after claymore miner dies.
Best thing about this miner is -straps command, i will probably change my miner, my question is 'is there any other miner which i can use -straps command, my cards are amd rx 570&470 8 gb
Second question;
I tried a lot of rom for my cards but every time i had a problem, how can i find which straps claymore is using, so i can flash my cards after claymore miner dies.
Try PhoenixMiner.
It all started with Eliovp's AMD Tweak to change/modify straps on the fly: https://bitcointalksearch.org/topic/amd-mem-tweak-xl-readmodify-timingsppstraps-on-the-fly-5123724
Later, Claymore added this tool to its miners as well as others.
November 29, 2020, 11:44:56 AM
It looks like we cannot use claymore miner after 1 or 2 dags.
Best thing about this miner is -straps command, i will probably change my miner, my question is 'is there any other miner which i can use -straps command, my cards are amd rx 570&470 8 gb
Second question;
I tried a lot of rom for my cards but every time i had a problem, how can i find which straps claymore is using, so i can flash my cards after claymore miner dies.
Best thing about this miner is -straps command, i will probably change my miner, my question is 'is there any other miner which i can use -straps command, my cards are amd rx 570&470 8 gb
Second question;
I tried a lot of rom for my cards but every time i had a problem, how can i find which straps claymore is using, so i can flash my cards after claymore miner dies.
November 29, 2020, 11:36:14 AM
Hi dude, my etherminer does not work and after added the -eres 0, it started to work but at the rate of 11mh/s from 30mh/s earlier on. Im using sapphire rx580 8gb. I have tried to switch to other miner but resulted the same. How to solve this? thanks in advance.
November 28, 2020, 05:43:03 AM
I used RaveOS 1.0.21 with Claymore 15 and I got error
GPU5 - not enough GPU memory to place DAG, you cannot mine this coin with this GPU
I found that upgrading to latest RAVEOS meaning to 1.0.24
fixed the issue.
Now mining properly.
GPU5 - not enough GPU memory to place DAG, you cannot mine this coin with this GPU
I found that upgrading to latest RAVEOS meaning to 1.0.24
fixed the issue.
Now mining properly.
You will end no option to in the next days... or for example not more ETC after today... I recommend you to go to a miner with development that also support Nvidia and AMD... You can have a look to lolMiner is working great and was one the 1st to have ETCHash adapted..
November 28, 2020, 05:18:19 AM
GPU4, OpenCL error -38 - cannot write buffer for DAG
Use "-eres 0" key.
claymore stopped supporting the miner. more and more problems. from the alternative miners interested in the gminer. hashrate is the same and no problem
November 28, 2020, 03:43:31 AM
GPU4, OpenCL error -38 - cannot write buffer for DAG
Use "-eres 0" key.
November 27, 2020, 10:09:13 PM
I used RaveOS 1.0.21 with Claymore 15 and I got error
GPU5 - not enough GPU memory to place DAG, you cannot mine this coin with this GPU
I found that upgrading to latest RAVEOS meaning to 1.0.24
fixed the issue.
Now mining properly.
GPU5 - not enough GPU memory to place DAG, you cannot mine this coin with this GPU
I found that upgrading to latest RAVEOS meaning to 1.0.24
fixed the issue.
Now mining properly.
November 26, 2020, 11:45:18 PM
"GPU5 - not enough GPU memory to place DAG, you cannot mine this coin with this GPU"
THIS IS A CLAYMORE PROBLEM !!!!!!
Phoenix rulezzzz
it drove me nuts now i am on Phoenix and it all runs smoothhhh
he knows but does not fx it or dont know howto fx it
and my cards are 8GB not the 4GB
Time to switch boys and hit him hard in the wallet then he will fx it
THIS IS A CLAYMORE PROBLEM !!!!!!
Phoenix rulezzzz
it drove me nuts now i am on Phoenix and it all runs smoothhhh
he knows but does not fx it or dont know howto fx it
and my cards are 8GB not the 4GB
Time to switch boys and hit him hard in the wallet then he will fx it
I don't think he will care much that you switch. He was last active about a year ago and if he cared he would of made a few minors updates here or there. However I think he made enough profit in the crazy times when each GPU mining was making like $5 a day, during 2017 and part of 2018.
Right now each GPU makes like what? Say $1 so he gets a penny a day for each GPU. Back in 2017 it was more like $5-7 a day and he was getting $0.07 per GPU per day and he had much more volume then. So the money is there but not as much as it was in the past. If he saved most of the ETH or switched some into BTC, he is fairly wealthy at the moment.
November 26, 2020, 05:02:18 PM
SORRY BUT, CLAYMORE DIED? i cant do to work.
November 25, 2020, 01:23:58 PM
I have a problem, have to be 30.000 every card and begans today with this problem,
ETH - Total Speed: 182.837 Mh/s, Total Shares: 36, Rejected: 0, Time: 00:13
ETH: GPU0 28.370 Mh/s, GPU1 19.797 Mh/s, GPU2 29.430 Mh/s, GPU3 29.587 Mh/s, GPU4 30.529 Mh/s, GPU5 28.219 Mh/s, GPU6 16.904 Mh/s
ETH: 11/25/20-19:19:30 - New job from eth.altpool.pro:3840
ETH - Total Speed: 182.837 Mh/s, Total Shares: 36, Rejected: 0, Time: 00:13
ETH: GPU0 28.370 Mh/s, GPU1 19.797 Mh/s, GPU2 29.430 Mh/s, GPU3 29.587 Mh/s, GPU4 30.529 Mh/s, GPU5 28.219 Mh/s, GPU6 16.904 Mh/s
GPU0 t=88C fan=25% P=113W, GPU1 t=89C fan=27% P=101W, GPU2 t=87C fan=44% P=133W, GPU3 t=74C fan=46% P=122W, GPU4 t=81C fan=46% P=127W, GPU5 t=87C fan=25% P=126W, GPU6 t=82C fan=38% P=47W
Total GPUs power consumption: 769 Watts
ETH: 11/25/20-19:19:46 - New job from eth.altpool.pro:3840
ETH - Total Speed: 191.972 Mh/s, Total Shares: 36, Rejected: 0, Time: 00:13
ETH: GPU0 26.200 Mh/s, GPU1 19.153 Mh/s, GPU2 29.417 Mh/s, GPU3 29.578 Mh/s, GPU4 29.972 Mh/s, GPU5 27.129 Mh/s, GPU6 30.523 Mh/s
ETH: 11/25/20-19:19:46 - New job from eth.altpool.pro:3840
ETH - Total Speed: 196.890 Mh/s, Total Shares: 36, Rejected: 0, Time: 00:13
ETH: GPU0 27.696 Mh/s, GPU1 20.761 Mh/s, GPU2 29.697 Mh/s, GPU3 29.176 Mh/s, GPU4 30.091 Mh/s, GPU5 28.951 Mh/s, GPU6 30.519 Mh/s
ETH: 11/25/20-19:19:59 - SHARE FOUND - (GPU 4)
ETH: Share accepted (32 ms)!
GPU #0 got incorrect share. If you see this warning often, make sure you did not overclock it too much!
GPU0 t=89C fan=25% P=115W, GPU1 t=89C fan=26% P=91W, GPU2 t=87C fan=44% P=133W, GPU3 t=74C fan=47% P=122W, GPU4 t=80C fan=46% P=127W, GPU5 t=88C fan=25% P=117W, GPU6 t=87C fan=39% P=128W
Total GPUs power consumption: 833 Watts
GPU #0 got incorrect share. If you see this warning often, make sure you did not overclock it too much!
ETH: 11/25/20-19:20:12 - SHARE FOUND - (GPU 6)
ETH: Share accepted (32 ms)!
ETH: 11/25/20-19:20:14 - New job from eth.altpool.pro:3840
ETH - Total Speed: 191.229 Mh/s, Total Shares: 38, Rejected: 0, Time: 00:14
ETH: GPU0 24.948 Mh/s, GPU1 20.469 Mh/s, GPU2 29.488 Mh/s, GPU3 29.555 Mh/s, GPU4 29.148 Mh/s, GPU5 27.101 Mh/s, GPU6 30.521 Mh/s
ETH: 11/25/20-19:20:16 - New job from eth.altpool.pro:3840
ETH - Total Speed: 196.596 Mh/s, Total Shares: 38, Rejected: 0, Time: 00:14
ETH: GPU0 28.176 Mh/s, GPU1 20.342 Mh/s, GPU2 29.275 Mh/s, GPU3 29.570 Mh/s, GPU4 30.554 Mh/s, GPU5 28.167 Mh/s, GPU6 30.512 Mh/s
ETH: 11/25/20-19:20:17 - New job from eth.altpool.pro:3840
ETH - Total Speed: 197.593 Mh/s, Total Shares: 38, Rejected: 0, Time: 00:14
ETH: GPU0 28.088 Mh/s, GPU1 20.433 Mh/s, GPU2 29.865 Mh/s, GPU3 29.335 Mh/s, GPU4 30.519 Mh/s, GPU5 29.057 Mh/s, GPU6 30.296 Mh/s
ETH: 11/25/20-19:20:20 - New job from eth.altpool.pro:3840
ETH - Total Speed: 196.489 Mh/s, Total Shares: 38, Rejected: 0, Time: 00:14
ETH: GPU0 28.047 Mh/s, GPU1 20.026 Mh/s, GPU2 29.652 Mh/s, GPU3 29.570 Mh/s, GPU4 30.519 Mh/s, GPU5 28.148 Mh/s, GPU6 30.527 Mh/s
GPU0 t=89C fan=25% P=113W, GPU1 t=89C fan=26% P=100W, GPU2 t=87C fan=44% P=134W, GPU3 t=74C fan=46% P=123W, GPU4 t=80C fan=46% P=127W, GPU5 t=88C fan=25% P=121W, GPU6 t=88C fan=38% P=133W
Total GPUs power consumption: 851 Watts
ETH: 11/25/20-19:20:48 - New job from eth.altpool.pro:3840
ETH - Total Speed: 184.983 Mh/s, Total Shares: 38, Rejected: 0, Time: 00:14
ETH: GPU0 28.254 Mh/s, GPU1 20.599 Mh/s, GPU2 29.574 Mh/s, GPU3 29.586 Mh/s, GPU4 30.555 Mh/s, GPU5 27.575 Mh/s, GPU6 18.840 Mh/s
GPU #4 got incorrect share. If you see this warning often, make sure you did not overclock it too much!
ETH: 11/25/20-19:20:56 - New job from eth.altpool.pro:3840
ETH - Total Speed: 190.060 Mh/s, Total Shares: 38, Rejected: 0, Time: 00:14
ETH: GPU0 26.645 Mh/s, GPU1 20.423 Mh/s, GPU2 29.416 Mh/s, GPU3 29.572 Mh/s, GPU4 30.439 Mh/s, GPU5 28.166 Mh/s, GPU6 25.398 Mh/s
ETH: 11/25/20-19:20:57 - New job from eth.altpool.pro:3840
ETH - Total Speed: 191.661 Mh/s, Total Shares: 38, Rejected: 0, Time: 00:14
ETH: GPU0 28.225 Mh/s, GPU1 20.423 Mh/s, GPU2 29.750 Mh/s, GPU3 29.447 Mh/s, GPU4 30.476 Mh/s, GPU5 27.941 Mh/s, GPU6 25.398 Mh/s
GPU0 t=89C fan=25% P=95W, GPU1 t=89C fan=27% P=101W, GPU2 t=87C fan=44% P=133W, GPU3 t=74C fan=47% P=122W, GPU4 t=80C fan=46% P=127W, GPU5 t=88C fan=25% P=129W, GPU6 t=83C fan=38% P=82W
Total GPUs power consumption: 789 Watts
ETH: 11/25/20-19:21:05 - New job from eth.altpool.pro:3840
ETH - Total Speed: 194.229 Mh/s, Total Shares: 38, Rejected: 0, Time: 00:14
ETH: GPU0 25.952 Mh/s, GPU1 20.308 Mh/s, GPU2 29.353 Mh/s, GPU3 29.572 Mh/s, GPU4 30.349 Mh/s, GPU5 28.150 Mh/s, GPU6 30.544 Mh/s
ETH: 11/25/20-19:21:17 - SHARE FOUND - (GPU 5)
ETH: Share accepted (94 ms)!
ETH: 11/25/20-19:21:26 - SHARE FOUND - (GPU 6)
ETH: Share accepted (47 ms)!
ETH: 11/25/20-19:21:29 - New job from eth.altpool.pro:3840
ETH - Total Speed: 195.434 Mh/s, Total Shares: 40, Rejected: 0, Time: 00:15
ETH: GPU0 27.831 Mh/s, GPU1 20.482 Mh/s, GPU2 29.425 Mh/s, GPU3 29.586 Mh/s, GPU4 30.500 Mh/s, GPU5 27.072 Mh/s, GPU6 30.537 Mh/s
ETH: 11/25/20-19:21:30 - New job from eth.altpool.pro:3840
ETH - Total Speed: 194.561 Mh/s, Total Shares: 40, Rejected: 0, Time: 00:15
ETH: GPU0 26.137 Mh/s, GPU1 19.654 Mh/s, GPU2 29.548 Mh/s, GPU3 29.419 Mh/s, GPU4 30.485 Mh/s, GPU5 28.797 Mh/s, GPU6 30.521 Mh/s
GPU0 t=89C fan=24% P=95W, GPU1 t=89C fan=27% P=100W, GPU2 t=87C fan=44% P=134W, GPU3 t=74C fan=46% P=122W, GPU4 t=81C fan=46% P=127W, GPU5 t=88C fan=25% P=120W, GPU6 t=86C fan=38% P=128W
Total GPUs power consumption: 826 Watts
GPU #1 got incorrect share. If you see this warning often, make sure you did not overclock it too much!
ETH: 11/25/20-19:21:36 - New job from eth.altpool.pro:3840
ETH - Total Speed: 180.543 Mh/s, Total Shares: 40, Rejected: 0, Time: 00:15
ETH: GPU0 27.208 Mh/s, GPU1 20.394 Mh/s, GPU2 29.525 Mh/s, GPU3 29.591 Mh/s, GPU4 30.519 Mh/s, GPU5 28.288 Mh/s, GPU6 15.019 Mh/s
ETH: 11/25/20-19:21:40 - SHARE FOUND - (GPU 2)
ETH: Share accepted (32 ms)!
ETH: 11/25/20-19:21:44 - SHARE FOUND - (GPU 5)
ETH: Share accepted (31 ms)!
ETH: 11/25/20-19:21:44 - SHARE FOUND - (GPU 2)
ETH: Share accepted (16 ms)!
GPU #1 got incorrect share. If you see this warning often, make sure you did not overclock it too much!
ETH: 11/25/20-19:22:01 - New job from eth.altpool.pro:3840
ETH - Total Speed: 177.003 Mh/s, Total Shares: 43, Rejected: 0, Time: 00:15
ETH: GPU0 26.829 Mh/s, GPU1 20.372 Mh/s, GPU2 29.403 Mh/s, GPU3 29.521 Mh/s, GPU4 30.501 Mh/s, GPU5 26.933 Mh/s, GPU6 13.444 Mh/s
ETH: 11/25/20-19:22:01 - New job from eth.altpool.pro:3840
ETH - Total Speed: 177.003 Mh/s, Total Shares: 43, Rejected: 0, Time: 00:15
ETH: GPU0 26.829 Mh/s, GPU1 20.372 Mh/s, GPU2 29.403 Mh/s, GPU3 29.521 Mh/s, GPU4 30.501 Mh/s, GPU5 26.933 Mh/s, GPU6 13.444 Mh/s
GPU0 t=89C fan=25% P=115W, GPU1 t=89C fan=27% P=98W, GPU2 t=87C fan=44% P=134W, GPU3 t=74C fan=46% P=122W, GPU4 t=80C fan=46% P=127W, GPU5 t=88C fan=25% P=125W, GPU6 t=88C fan=38% P=134W
Total GPUs power consumption: 855 Watts
ETH: 11/25/20-19:22:06 - New job from eth.altpool.pro:3840
ETH - Total Speed: 194.275 Mh/s, Total Shares: 43, Rejected: 0, Time: 00:16
ETH: GPU0 26.325 Mh/s, GPU1 20.337 Mh/s, GPU2 29.419 Mh/s, GPU3 29.593 Mh/s, GPU4 30.488 Mh/s, GPU5 27.708 Mh/s, GPU6 30.405 Mh/s
ETH: 11/25/20-19:22:06 - SHARE FOUND - (GPU 3)
ETH: Share accepted (31 ms)!
ETH: 11/25/20-19:22:23 - SHARE FOUND - (GPU 6)
ETH: Share accepted (500 ms)!
ETH: 11/25/20-19:22:24 - SHARE FOUND - (GPU 5)
ETH: Share accepted (47 ms)!
IN OTHER POOL WITH ALWAYS CONFIGURATION...
U4 - OpenCL error -61 - cannot allocate big buffer for DAG. Check readme.txt for possible solutions.
GPU5 - OpenCL error -61 - cannot allocate big buffer for DAG. Check readme.txt for possible solutions.
GPU1 - OpenCL error -61 - cannot allocate big buffer for DAG. Check readme.txt for possible solutions.
ETH: 11/25/20-19:26:53 - New job from asia.ethash-hub.miningpoolhub.com:20535
ETH - Total Speed: 0.000 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:00
ETH: GPU0 0.000 Mh/s, GPU1 0.000 Mh/s, GPU2 0.000 Mh/s, GPU3 0.000 Mh/s, GPU4 0.000 Mh/s, GPU5 0.000 Mh/s, GPU6 0.000 Mh/s
GPU 0 failed
Setting DAG epoch #377 for GPU2
GPU 2 failed
GPU 6 failed
GPU 3 failed
GPU 5 failed
GPU2, OpenCL error -38 - cannot write buffer for DAG
Setting DAG epoch #377 for GPU6
Setting DAG epoch #377 for GPU0
Setting DAG epoch #377 for GPU3
GPU 1 failed
GPU6, OpenCL error -38 - cannot write buffer for DAG
GPU3, OpenCL error -38 - cannot write buffer for DAG
Setting DAG epoch #377 for GPU1
Setting DAG epoch #377 for GPU4
GPU 4 failed
Setting DAG epoch #377 for GPU5
GPU1, OpenCL error -38 - cannot write buffer for DAG
GPU0, OpenCL error -38 - cannot write buffer for DAG
GPU5, OpenCL error -38 - cannot write buffer for DAG
GPU4, OpenCL error -38 - cannot write buffer for DAG
ETH - Total Speed: 182.837 Mh/s, Total Shares: 36, Rejected: 0, Time: 00:13
ETH: GPU0 28.370 Mh/s, GPU1 19.797 Mh/s, GPU2 29.430 Mh/s, GPU3 29.587 Mh/s, GPU4 30.529 Mh/s, GPU5 28.219 Mh/s, GPU6 16.904 Mh/s
ETH: 11/25/20-19:19:30 - New job from eth.altpool.pro:3840
ETH - Total Speed: 182.837 Mh/s, Total Shares: 36, Rejected: 0, Time: 00:13
ETH: GPU0 28.370 Mh/s, GPU1 19.797 Mh/s, GPU2 29.430 Mh/s, GPU3 29.587 Mh/s, GPU4 30.529 Mh/s, GPU5 28.219 Mh/s, GPU6 16.904 Mh/s
GPU0 t=88C fan=25% P=113W, GPU1 t=89C fan=27% P=101W, GPU2 t=87C fan=44% P=133W, GPU3 t=74C fan=46% P=122W, GPU4 t=81C fan=46% P=127W, GPU5 t=87C fan=25% P=126W, GPU6 t=82C fan=38% P=47W
Total GPUs power consumption: 769 Watts
ETH: 11/25/20-19:19:46 - New job from eth.altpool.pro:3840
ETH - Total Speed: 191.972 Mh/s, Total Shares: 36, Rejected: 0, Time: 00:13
ETH: GPU0 26.200 Mh/s, GPU1 19.153 Mh/s, GPU2 29.417 Mh/s, GPU3 29.578 Mh/s, GPU4 29.972 Mh/s, GPU5 27.129 Mh/s, GPU6 30.523 Mh/s
ETH: 11/25/20-19:19:46 - New job from eth.altpool.pro:3840
ETH - Total Speed: 196.890 Mh/s, Total Shares: 36, Rejected: 0, Time: 00:13
ETH: GPU0 27.696 Mh/s, GPU1 20.761 Mh/s, GPU2 29.697 Mh/s, GPU3 29.176 Mh/s, GPU4 30.091 Mh/s, GPU5 28.951 Mh/s, GPU6 30.519 Mh/s
ETH: 11/25/20-19:19:59 - SHARE FOUND - (GPU 4)
ETH: Share accepted (32 ms)!
GPU #0 got incorrect share. If you see this warning often, make sure you did not overclock it too much!
GPU0 t=89C fan=25% P=115W, GPU1 t=89C fan=26% P=91W, GPU2 t=87C fan=44% P=133W, GPU3 t=74C fan=47% P=122W, GPU4 t=80C fan=46% P=127W, GPU5 t=88C fan=25% P=117W, GPU6 t=87C fan=39% P=128W
Total GPUs power consumption: 833 Watts
GPU #0 got incorrect share. If you see this warning often, make sure you did not overclock it too much!
ETH: 11/25/20-19:20:12 - SHARE FOUND - (GPU 6)
ETH: Share accepted (32 ms)!
ETH: 11/25/20-19:20:14 - New job from eth.altpool.pro:3840
ETH - Total Speed: 191.229 Mh/s, Total Shares: 38, Rejected: 0, Time: 00:14
ETH: GPU0 24.948 Mh/s, GPU1 20.469 Mh/s, GPU2 29.488 Mh/s, GPU3 29.555 Mh/s, GPU4 29.148 Mh/s, GPU5 27.101 Mh/s, GPU6 30.521 Mh/s
ETH: 11/25/20-19:20:16 - New job from eth.altpool.pro:3840
ETH - Total Speed: 196.596 Mh/s, Total Shares: 38, Rejected: 0, Time: 00:14
ETH: GPU0 28.176 Mh/s, GPU1 20.342 Mh/s, GPU2 29.275 Mh/s, GPU3 29.570 Mh/s, GPU4 30.554 Mh/s, GPU5 28.167 Mh/s, GPU6 30.512 Mh/s
ETH: 11/25/20-19:20:17 - New job from eth.altpool.pro:3840
ETH - Total Speed: 197.593 Mh/s, Total Shares: 38, Rejected: 0, Time: 00:14
ETH: GPU0 28.088 Mh/s, GPU1 20.433 Mh/s, GPU2 29.865 Mh/s, GPU3 29.335 Mh/s, GPU4 30.519 Mh/s, GPU5 29.057 Mh/s, GPU6 30.296 Mh/s
ETH: 11/25/20-19:20:20 - New job from eth.altpool.pro:3840
ETH - Total Speed: 196.489 Mh/s, Total Shares: 38, Rejected: 0, Time: 00:14
ETH: GPU0 28.047 Mh/s, GPU1 20.026 Mh/s, GPU2 29.652 Mh/s, GPU3 29.570 Mh/s, GPU4 30.519 Mh/s, GPU5 28.148 Mh/s, GPU6 30.527 Mh/s
GPU0 t=89C fan=25% P=113W, GPU1 t=89C fan=26% P=100W, GPU2 t=87C fan=44% P=134W, GPU3 t=74C fan=46% P=123W, GPU4 t=80C fan=46% P=127W, GPU5 t=88C fan=25% P=121W, GPU6 t=88C fan=38% P=133W
Total GPUs power consumption: 851 Watts
ETH: 11/25/20-19:20:48 - New job from eth.altpool.pro:3840
ETH - Total Speed: 184.983 Mh/s, Total Shares: 38, Rejected: 0, Time: 00:14
ETH: GPU0 28.254 Mh/s, GPU1 20.599 Mh/s, GPU2 29.574 Mh/s, GPU3 29.586 Mh/s, GPU4 30.555 Mh/s, GPU5 27.575 Mh/s, GPU6 18.840 Mh/s
GPU #4 got incorrect share. If you see this warning often, make sure you did not overclock it too much!
ETH: 11/25/20-19:20:56 - New job from eth.altpool.pro:3840
ETH - Total Speed: 190.060 Mh/s, Total Shares: 38, Rejected: 0, Time: 00:14
ETH: GPU0 26.645 Mh/s, GPU1 20.423 Mh/s, GPU2 29.416 Mh/s, GPU3 29.572 Mh/s, GPU4 30.439 Mh/s, GPU5 28.166 Mh/s, GPU6 25.398 Mh/s
ETH: 11/25/20-19:20:57 - New job from eth.altpool.pro:3840
ETH - Total Speed: 191.661 Mh/s, Total Shares: 38, Rejected: 0, Time: 00:14
ETH: GPU0 28.225 Mh/s, GPU1 20.423 Mh/s, GPU2 29.750 Mh/s, GPU3 29.447 Mh/s, GPU4 30.476 Mh/s, GPU5 27.941 Mh/s, GPU6 25.398 Mh/s
GPU0 t=89C fan=25% P=95W, GPU1 t=89C fan=27% P=101W, GPU2 t=87C fan=44% P=133W, GPU3 t=74C fan=47% P=122W, GPU4 t=80C fan=46% P=127W, GPU5 t=88C fan=25% P=129W, GPU6 t=83C fan=38% P=82W
Total GPUs power consumption: 789 Watts
ETH: 11/25/20-19:21:05 - New job from eth.altpool.pro:3840
ETH - Total Speed: 194.229 Mh/s, Total Shares: 38, Rejected: 0, Time: 00:14
ETH: GPU0 25.952 Mh/s, GPU1 20.308 Mh/s, GPU2 29.353 Mh/s, GPU3 29.572 Mh/s, GPU4 30.349 Mh/s, GPU5 28.150 Mh/s, GPU6 30.544 Mh/s
ETH: 11/25/20-19:21:17 - SHARE FOUND - (GPU 5)
ETH: Share accepted (94 ms)!
ETH: 11/25/20-19:21:26 - SHARE FOUND - (GPU 6)
ETH: Share accepted (47 ms)!
ETH: 11/25/20-19:21:29 - New job from eth.altpool.pro:3840
ETH - Total Speed: 195.434 Mh/s, Total Shares: 40, Rejected: 0, Time: 00:15
ETH: GPU0 27.831 Mh/s, GPU1 20.482 Mh/s, GPU2 29.425 Mh/s, GPU3 29.586 Mh/s, GPU4 30.500 Mh/s, GPU5 27.072 Mh/s, GPU6 30.537 Mh/s
ETH: 11/25/20-19:21:30 - New job from eth.altpool.pro:3840
ETH - Total Speed: 194.561 Mh/s, Total Shares: 40, Rejected: 0, Time: 00:15
ETH: GPU0 26.137 Mh/s, GPU1 19.654 Mh/s, GPU2 29.548 Mh/s, GPU3 29.419 Mh/s, GPU4 30.485 Mh/s, GPU5 28.797 Mh/s, GPU6 30.521 Mh/s
GPU0 t=89C fan=24% P=95W, GPU1 t=89C fan=27% P=100W, GPU2 t=87C fan=44% P=134W, GPU3 t=74C fan=46% P=122W, GPU4 t=81C fan=46% P=127W, GPU5 t=88C fan=25% P=120W, GPU6 t=86C fan=38% P=128W
Total GPUs power consumption: 826 Watts
GPU #1 got incorrect share. If you see this warning often, make sure you did not overclock it too much!
ETH: 11/25/20-19:21:36 - New job from eth.altpool.pro:3840
ETH - Total Speed: 180.543 Mh/s, Total Shares: 40, Rejected: 0, Time: 00:15
ETH: GPU0 27.208 Mh/s, GPU1 20.394 Mh/s, GPU2 29.525 Mh/s, GPU3 29.591 Mh/s, GPU4 30.519 Mh/s, GPU5 28.288 Mh/s, GPU6 15.019 Mh/s
ETH: 11/25/20-19:21:40 - SHARE FOUND - (GPU 2)
ETH: Share accepted (32 ms)!
ETH: 11/25/20-19:21:44 - SHARE FOUND - (GPU 5)
ETH: Share accepted (31 ms)!
ETH: 11/25/20-19:21:44 - SHARE FOUND - (GPU 2)
ETH: Share accepted (16 ms)!
GPU #1 got incorrect share. If you see this warning often, make sure you did not overclock it too much!
ETH: 11/25/20-19:22:01 - New job from eth.altpool.pro:3840
ETH - Total Speed: 177.003 Mh/s, Total Shares: 43, Rejected: 0, Time: 00:15
ETH: GPU0 26.829 Mh/s, GPU1 20.372 Mh/s, GPU2 29.403 Mh/s, GPU3 29.521 Mh/s, GPU4 30.501 Mh/s, GPU5 26.933 Mh/s, GPU6 13.444 Mh/s
ETH: 11/25/20-19:22:01 - New job from eth.altpool.pro:3840
ETH - Total Speed: 177.003 Mh/s, Total Shares: 43, Rejected: 0, Time: 00:15
ETH: GPU0 26.829 Mh/s, GPU1 20.372 Mh/s, GPU2 29.403 Mh/s, GPU3 29.521 Mh/s, GPU4 30.501 Mh/s, GPU5 26.933 Mh/s, GPU6 13.444 Mh/s
GPU0 t=89C fan=25% P=115W, GPU1 t=89C fan=27% P=98W, GPU2 t=87C fan=44% P=134W, GPU3 t=74C fan=46% P=122W, GPU4 t=80C fan=46% P=127W, GPU5 t=88C fan=25% P=125W, GPU6 t=88C fan=38% P=134W
Total GPUs power consumption: 855 Watts
ETH: 11/25/20-19:22:06 - New job from eth.altpool.pro:3840
ETH - Total Speed: 194.275 Mh/s, Total Shares: 43, Rejected: 0, Time: 00:16
ETH: GPU0 26.325 Mh/s, GPU1 20.337 Mh/s, GPU2 29.419 Mh/s, GPU3 29.593 Mh/s, GPU4 30.488 Mh/s, GPU5 27.708 Mh/s, GPU6 30.405 Mh/s
ETH: 11/25/20-19:22:06 - SHARE FOUND - (GPU 3)
ETH: Share accepted (31 ms)!
ETH: 11/25/20-19:22:23 - SHARE FOUND - (GPU 6)
ETH: Share accepted (500 ms)!
ETH: 11/25/20-19:22:24 - SHARE FOUND - (GPU 5)
ETH: Share accepted (47 ms)!
IN OTHER POOL WITH ALWAYS CONFIGURATION...
U4 - OpenCL error -61 - cannot allocate big buffer for DAG. Check readme.txt for possible solutions.
GPU5 - OpenCL error -61 - cannot allocate big buffer for DAG. Check readme.txt for possible solutions.
GPU1 - OpenCL error -61 - cannot allocate big buffer for DAG. Check readme.txt for possible solutions.
ETH: 11/25/20-19:26:53 - New job from asia.ethash-hub.miningpoolhub.com:20535
ETH - Total Speed: 0.000 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:00
ETH: GPU0 0.000 Mh/s, GPU1 0.000 Mh/s, GPU2 0.000 Mh/s, GPU3 0.000 Mh/s, GPU4 0.000 Mh/s, GPU5 0.000 Mh/s, GPU6 0.000 Mh/s
GPU 0 failed
Setting DAG epoch #377 for GPU2
GPU 2 failed
GPU 6 failed
GPU 3 failed
GPU 5 failed
GPU2, OpenCL error -38 - cannot write buffer for DAG
Setting DAG epoch #377 for GPU6
Setting DAG epoch #377 for GPU0
Setting DAG epoch #377 for GPU3
GPU 1 failed
GPU6, OpenCL error -38 - cannot write buffer for DAG
GPU3, OpenCL error -38 - cannot write buffer for DAG
Setting DAG epoch #377 for GPU1
Setting DAG epoch #377 for GPU4
GPU 4 failed
Setting DAG epoch #377 for GPU5
GPU1, OpenCL error -38 - cannot write buffer for DAG
GPU0, OpenCL error -38 - cannot write buffer for DAG
GPU5, OpenCL error -38 - cannot write buffer for DAG
GPU4, OpenCL error -38 - cannot write buffer for DAG
November 25, 2020, 11:00:21 AM
I got an issue today anyone can help?
ETH: Stratum - Cannot connect to asia1.ethermine.org:4444
ETH: Stratum - Failed to connect, retry in 20 sec...
Any idea why? I ping the address and seems no issue?
ETH: Stratum - Cannot connect to asia1.ethermine.org:4444
ETH: Stratum - Failed to connect, retry in 20 sec...
Any idea why? I ping the address and seems no issue?
Did you have an issue where you submitted a large amount of rejected shares? You can get a temp ban if you did. See if it connect with say the Eu1 or US1 servers just to see if its a problem. Can also try Nano just to confirm if it is a problem with asia1 server / pool / or something else. Lot of miners having troubles due to 4gb dag size and problems with miners as we approach it...even some 8gb cards are having problems because of issues in the mining software. Most authors are right on it but Claymore is MIA and has been for a while. Ive got it running on a couple of linux rigs but oddly even a couple of those have had to switch.
Dont be afraid to try other miners...as miners you must be ready and willing to change.
November 25, 2020, 09:27:09 AM
I got an issue today anyone can help?
ETH: Stratum - Cannot connect to asia1.ethermine.org:4444
ETH: Stratum - Failed to connect, retry in 20 sec...
Any idea why? I ping the address and seems no issue?
ETH: Stratum - Cannot connect to asia1.ethermine.org:4444
ETH: Stratum - Failed to connect, retry in 20 sec...
Any idea why? I ping the address and seems no issue?
November 24, 2020, 10:35:31 PM
Until epoch 379.
According to the OP and Claymore's last few posts:NOTE: please upgrade to v15.0 as soon as possible, old versions support up to #299 epoch only, they will fail then!
v15.0 supports up to #384 epoch (4GB DAG size).
v15.0 supports up to #384 epoch (4GB DAG size).
November 23, 2020, 03:59:45 PM
"GPU5 - not enough GPU memory to place DAG, you cannot mine this coin with this GPU"
THIS IS A CLAYMORE PROBLEM !!!!!!
Phoenix rulezzzz
it drove me nuts now i am on Phoenix and it all runs smoothhhh
he knows but does not fx it or dont know howto fx it
and my cards are 8GB not the 4GB
Time to switch boys and hit him hard in the wallet then he will fx it
THIS IS A CLAYMORE PROBLEM !!!!!!
Phoenix rulezzzz
it drove me nuts now i am on Phoenix and it all runs smoothhhh
he knows but does not fx it or dont know howto fx it
and my cards are 8GB not the 4GB
Time to switch boys and hit him hard in the wallet then he will fx it
November 23, 2020, 03:07:52 PM
Anyone is mining ETH on RTX 3080 ? my maximum hashrate is 90.5MH/s average 89,5MH/s I saw on youtube one guy reaching 98MH/s even 100MH/s sometimes .
any suggestion about how to inprove hashrate on RTX 3080
any suggestion about how to inprove hashrate on RTX 3080
I'm getting ca 100Mhs with lolMiner... you need to push memory and Power Limit to have it
Jump to: