Topic: Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux) - page 1189. (Read 6590565 times)

Hey guys, do you know what http error 22 means ? Sia disconnects and then reconnects, is there something with the pool? My other miner doesn't stop and they both use same router.
I have this in my config
-dpool http://sia-eu1.nanopool.org:9980/miner/header?address="myaddress&rig=rig"

No idea, when dual mining ETHF and SIA, you lose about 9-5% of hashpower dual to inefficiencies at poolside, which can't be avoided.

Perhaps, you should consider dual mining ETHF and SIA.

Using "Claymore's Dual Ethereum+Decred_Siacoin AMD GPU Miner v5.1 Beta2", gives marginally higher accepted share averages then the last 2 versions.

No Stratum support for SIA and you should use https://siamining.com/ - even though it is at 3% fees.

And, setting cards to Slow mining mode (1) for dual mining ETHF and SIA tends to give slightly better share averages over 24 hours then Fast (0) or Mix of Fast (0) and Slow (1).

But, this is for Windows 7 64bit, averages may be different on Windows 8 or Windows 10 or Linux.

You'll, just have test it out for yourself.

I know that it is not a pool sub - but it is much faster to get an answer here

I mine dual ETC+SC with CDM

My pool is nanopool. I'm getting about two time less estimations on nanopool (ETC and 25% less of SIA) compared with https://www.whattomine.com calculator

My rates are 118MHs - ETC, 2300MHs - SC. Luck is OK

1) Nanopool Estimations
ETC - 1.826 per day
SIA - 4,786.902 per day

2) Calculator
ETC - 3.938171 per day
SIA - 6,420.437005 per day


Is it known issue, smth wrong with their stats or anything else?

Thanks in advance, but i cant find where i change this on my mobo (Ga 970a ds3p), someone can say where i can change this on my bios?

i tried to solo mine sia pointed to http://127.0.0.1:9980
but i get
 DCR: http error #22.
 DCR: Check username and password, and/or pool state.
 DCR: Failed to connect to pool (127.0.0.1:9980), retry in 10 sec...

where is the config file so i can set rpcuser/password

i'm useing Sia-UI-win32-x64

Not, at least in linux, and I think not need it in Windows... Try to check your BIOS for the PCIe conf. and set Gen2...

Here a good link for risers, (http://spacience.blogspot.com.es/2016/03/fix-it-bible-pcie-1x-to-16x-risers-for.html) it's not my page but I found it usefull when I was starting with my rig!

Regards!

Does usb 3.0 pci-e risers requires driver instalation??
My mobo is not finding my video cards after i put on usb pci-e risers

http://ethc.epool.io/ seems one of the very good pools.
Set it as primary and put https://etc.suprnova.cc as a backup pool.

Yes you can, ETC is the original Ether, it's the same coin this dual miner was designed for. I'm mining SIA and ETC works as good as ETH and SIA

Pools I like for ETC:

https://etc.suprnova.cc
http://www.epool.io/#/

The best way will be to start reading first post (OP)

Will answer both your questions

can i mine ETC with the cloymore Miner and use Siacoin at the same time?
What for a ETC pool is the best in this time?

Unlocked

I'm mining on 12020   Looks like you need the worker specified as well

POOL: us-east.ethash-hub.miningpoolhub.com:12020, WALLET: login.worker, PSW: x, WORKER: login.worker, ESM: 2, ALLPOOLS: 1

I don't have allcoins specified.  When you use 12020 you have to set which coin you want to mine at the hub workers page https://miningpoolhub.com/?page=account&action=hubworkers  Additionally on that page you can set it to auto-mine etc or eth based on profitability.

The 17020 port also mines the most profitable, you just don't have to set it up on the hub workers page.

PM sent. Please be quick.... I need to park 750MHs to ETC 

Hi all!  I have the new RX 480 cards.  Will this miner work with those?

Please add all data on GPUs and mining stats in separate topic

https://bitcointalksearch.org/topic/claymores-dual-miner-settings-and-statistics-1550780

Port 12020 of MinningPoolHub is a multi-algo port, you cant use it with ClaymoreDualMiner.

CDM can only mining Ethash!
So you have to use:
stratum+tcp://europe.ethash-hub.miningpoolhub.com:17020
stratum+tcp://us-east.ethash-hub.miningpoolhub.com:17020
stratum+tcp://asia.ethash-hub.miningpoolhub.com:17020

This working for me without problem!
Regards

https://ethc.coin-miners.info/
works for me so far

Now I get this..
ETH: 08/02/16-01:15:26 - SHARE FOUND - (GPU 0)
 SC: 08/02/16-01:15:41 - SHARE FOUND - (GPU 0)
 SC: Share accepted!
ETH: 08/02/16-01:15:42 - SHARE FOUND - (GPU 0)
ETH: Stratum - socket send failed 10053, disconnect
ETH: Stratum - connecting to 'europe.ethash-hub.miningpoolhub.com' <46.101.243.246> port 17020
ETH: Stratum - Connected (europe.ethash-hub.miningpoolhub.com:17020)
ETH: Authorized
GPU0 t=89C fan=99%
ETH: 08/02/16-01:15:47 - New job from europe.ethash-hub.miningpoolhub.com:17020
ETH - Total Speed: 26.728 Mh/s, Total Shares: 3, Rejected: 0, Time: 00:02
ETH: GPU0 26.728 Mh/s
 SC - Total Speed: 360.822 Mh/s, Total Shares: 1, Rejected: 0
 SC: GPU0 360.822 Mh/s
ETH: 08/02/16-01:15:48 - SHARE FOUND - (GPU 0)
ETH: 08/02/16-01:15:49 - SHARE FOUND - (GPU 0)
ETH: 08/02/16-01:15:58 - SHARE FOUND - (GPU 0)
ETH: Stratum - socket send failed 10053, disconnect
ETH: Stratum - connecting to 'europe.ethash-hub.miningpoolhub.com' <46.101.243.246> port 17020
ETH: Stratum - Connected (europe.ethash-hub.miningpoolhub.com:17020)
ETH: Authorized
ETH: 08/02/16-01:15:59 - SHARE FOUND - (GPU 0)
GPU0 t=89C fan=99%
ETH: Stratum - socket send failed 10053, disconnect
ETH: Stratum - connecting to 'europe.ethash-hub.miningpoolhub.com' <46.101.243.246> port 17020
ETH: Stratum - Connected (europe.ethash-hub.miningpoolhub.com:17020)
ETH: Authorized
ETH: 08/02/16-01:16:40 - SHARE FOUND - (GPU 0)
ETH: Share accepted (62 ms)!
ETH: 08/02/16-01:16:45 - SHARE FOUND - (GPU 0)
ETH: Share accepted (63 ms)!
GPU0 t=89C fan=99%
ETH: 08/02/16-01:16:47 - New job from europe.ethash-hub.miningpoolhub.com:17020 (FAILOVER 1)
ETH - Total Speed: 26.731 Mh/s, Total Shares: 9, Rejected: 0, Time: 00:03
ETH: GPU0 26.731 Mh/s
 SC - Total Speed: 360.871 Mh/s, Total Shares: 1, Rejected: 0
 SC: GPU0 360.871 Mh/s
ETH: 08/02/16-01:17:00 - SHARE FOUND - (GPU 0)
ETH: Share accepted (62 ms)!
ETH: 08/02/16-01:17:03 - New job from europe.ethash-hub.miningpoolhub.com:17020 (FAILOVER 1)
ETH - Total Speed: 26.709 Mh/s, Total Shares: 10, Rejected: 0, Time:



EDIT: I also dont understand if its mining ETC? As it should at the moment

UPDATE: I dont see my miner anywhere at the pools stats hasrate zer0!
UPDATE2: 12020 worked no better.. ETC-ETH hashrate ZERO..I think you understand that I just want more profits for all.. Is this Idea worth it? May be just mine ETC then.. I am tired of watching the price.. will go play some guitar.. something heavy

HI ALL
can I mine with dual miner only eth and only in dwarfpool, but to 2 different eth wallets?