Really like the temp and fan speed showing, helps me to tune the -ethi and fan on all four GPU's
Two Thumbs UP
Topic: Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux) - page 1318. (Read 6590565 times)
May 14, 2016, 01:57:09 PM
@claymore - just had a chance to move to latest 4.2.
Really like the temp and fan speed showing, helps me to tune the -ethi and fan on all four GPU's
Two Thumbs UP
Really like the temp and fan speed showing, helps me to tune the -ethi and fan on all four GPU's
Two Thumbs UP
May 14, 2016, 01:11:37 PM
And of course install 15.12 or its dll-s at least.
Never mind, tried in the miners folder...
May 14, 2016, 01:04:04 PM
thanks Claymore for the miner.. it works very good!
i´m getting kinda slow hashrates across all my rigs (compared to what other users report)
rigs are win7, 4gb, 15.12 dll in dir (it works the same as clean installed driver), variables set...
270x = 13.4 Mh/s
7950 = 18 Mh/s
280x = 18 Mh/s (!) gigabyte ones, 1020/1550
when i try to set -cclock or -mclock values, the miner fails to start and closes itself.
any help or tips will be appreciated.
i´m getting kinda slow hashrates across all my rigs (compared to what other users report)
rigs are win7, 4gb, 15.12 dll in dir (it works the same as clean installed driver), variables set...
270x = 13.4 Mh/s
7950 = 18 Mh/s
280x = 18 Mh/s (!) gigabyte ones, 1020/1550
when i try to set -cclock or -mclock values, the miner fails to start and closes itself.
any help or tips will be appreciated.
Try to set "-etha 0" or "-etha 1" option and select the best for every card, check readme for details.
May 14, 2016, 12:54:03 PM
hello, this miner in single mode eth is More Fast of classic ethminer.exe or not ?? tnx
May 14, 2016, 12:38:40 PM
is this right if i want to solo mine Expanse
EthDcrMiner64.exe -mode 1 -epool http://localhost:9656 -ewal 0xa9a1b80793c595a7b11bcc9f657d55cff58ba325 -epsw x -allcoins -1
EthDcrMiner64.exe -mode 1 -epool http://localhost:9656 -ewal 0xa9a1b80793c595a7b11bcc9f657d55cff58ba325 -epsw x -allcoins -1
You don't need -ewal or -epsw if you're connecting directly to gexp. Any block rewards you get will go to an account in your gexp wallet.
May 14, 2016, 10:23:41 AM
must just say thank you for the miner software.
with CDM i get 33mhs and with ethminer-0.9.41-genoil-1.0.8 i get 29.5-29.8mhs
AMD 390x @1160Mhz powerlimit +50 core volt +30 set with msi afterburner
GREATE JOB
with CDM i get 33mhs and with ethminer-0.9.41-genoil-1.0.8 i get 29.5-29.8mhs
AMD 390x @1160Mhz powerlimit +50 core volt +30 set with msi afterburner
GREATE JOB
May 14, 2016, 10:01:16 AM
is this right if i want to solo mine Expanse
EthDcrMiner64.exe -mode 1 -epool http://localhost:9656 -ewal 0xa9a1b80793c595a7b11bcc9f657d55cff58ba325 -epsw x -allcoins -1
EthDcrMiner64.exe -mode 1 -epool http://localhost:9656 -ewal 0xa9a1b80793c595a7b11bcc9f657d55cff58ba325 -epsw x -allcoins -1
May 14, 2016, 09:57:08 AM
270x = 13.4 Mh/s
7950 = 18 Mh/s
280x = 18 Mh/s (!) gigabyte ones, 1020/1550
when i try to set -cclock or -mclock values, the miner fails to start and closes itself.
7950 = 18 Mh/s
280x = 18 Mh/s (!) gigabyte ones, 1020/1550
when i try to set -cclock or -mclock values, the miner fails to start and closes itself.
My 7950 (Asus) had the same 18MH/s at current DAG size if not OC'ed. At 1050/1550 they hash at 20.150MH/s (including Decred).
My 7970 (MSI) has around 22MHs at 1150/1500, it had only 18.7 before bios update to latest Spring 2013 for my card and didn't want to OC.
I use MSI Afterburner for OC (also added some power limit option) on Windows and use only -tt miner option for cooler control.
May 14, 2016, 09:37:13 AM
thanks Claymore for the miner.. it works very good!
i´m getting kinda slow hashrates across all my rigs (compared to what other users report)
rigs are win7, 4gb, 15.12 dll in dir (it works the same as clean installed driver), variables set...
270x = 13.4 Mh/s
7950 = 18 Mh/s
280x = 18 Mh/s (!) gigabyte ones, 1020/1550
when i try to set -cclock or -mclock values, the miner fails to start and closes itself.
any help or tips will be appreciated.
i´m getting kinda slow hashrates across all my rigs (compared to what other users report)
rigs are win7, 4gb, 15.12 dll in dir (it works the same as clean installed driver), variables set...
270x = 13.4 Mh/s
7950 = 18 Mh/s
280x = 18 Mh/s (!) gigabyte ones, 1020/1550
when i try to set -cclock or -mclock values, the miner fails to start and closes itself.
any help or tips will be appreciated.
May 14, 2016, 09:23:38 AM
Claymore, as the run on dual miner miningrigrentals.com?
Thank you!
Search for "miningrigrentals" in this thread, some people use miner there.
Make sure that miner has access to internet and specify "-allpools 1" (or better "-allcoins 1") so it will use default pools for devfee.
May 14, 2016, 08:45:53 AM
CAn we mine EXP or KR or other Eth based coins?
Page 1:
Quote
FEATURES:
...
- Supports Ethereum forks (Expanse, etc).
...
- Supports Ethereum forks (Expanse, etc).
May 14, 2016, 08:33:18 AM
CAn we mine EXP or KR or other Eth based coins?
May 14, 2016, 08:08:07 AM
What I cannot understand is why do you want to use miner with proxy if it can work with pools directly? It will reduce effective hashrate by 1% at least.
One of possible reasons is a centralized administration which was also promised for your miner as an utility but I believe is not yet implemented/available. May 14, 2016, 07:13:35 AM
Claymore, as the run on dual miner miningrigrentals.com?
Thank you!
Search for "miningrigrentals" in this thread, some people use miner there.
Make sure that miner has access to internet and specify "-allpools 1" (or better "-allcoins 1") so it will use default pools for devfee.
May 14, 2016, 07:09:06 AM
Claymore, as the run on dual miner miningrigrentals.com?
Thank you!
Search for "miningrigrentals" in this thread, some people use miner there.
May 14, 2016, 07:02:07 AM
Can I get suprnova.cc running for ETH?
May 14, 2016, 07:01:57 AM
Claymore, as the run on dual miner miningrigrentals.com?
Thank you!
Search for "miningrigrentals" in this thread, some people use miner there.
May 14, 2016, 06:45:36 AM
Anyone here can recommend an ETH-pool that pays per share? (or any other method than single mining)
May 14, 2016, 06:42:37 AM
Claymore, as the run on dual miner miningrigrentals.com?
Thank you!
May 14, 2016, 06:32:42 AM
Claymore would it be possible to add worker and hashrate sending with http and eth-proxy? (http://127.0.0.1:8080/f1)
I think it has been requested past few days, but I am not sure I have seen a definitive yes/no answer
This is just for convenience when viewing the stats at dwarfpool.
Without the worker name, the proxy replaces it with some random numbers.
I think it has been requested past few days, but I am not sure I have seen a definitive yes/no answer
This is just for convenience when viewing the stats at dwarfpool.
Without the worker name, the proxy replaces it with some random numbers.
What I cannot understand is why do you want to use miner with proxy if it can work with pools directly? It will reduce effective hashrate by 1% at least.
Proxy failover was going to be my answer, but I have just found the options for it in your readme.
Will use it directly as you suggest then, thanks.
Jump to: