Topic: Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux) - page 842. (Read 6590718 times)

What is -esm 3?

Try: -esm 3

What's wrong with my .bat line?

This is what I get:

Just looking for some opinions here:

I fired up 2 AMD 7950's Dual-Mining ETH and Sia Last night. Been sort of tweaking the settings and Overclock over the past 12H but wanted to see if I am getting proper results for my settings:


BAT:

setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100
EthDcrMiner64.exe -epool us1.ethpool.org:3333 -ewal 0x9C242ad2B0cF40f58e01C7b8c3b79f83F792bD18  -dpool "http://siamining.com:9980/miner/header?
address=be71aa6e9ca5e046fde5c6fedc9a295bbf631acd300b57d7e20559bd53850f3d86442bc20ee8&worker=Work1" -dcoin sia

CLOCKS:

2 AMD 7950: 1050/1500

Haven't done much OC tweaking/testing with these - Just raised memory clocks mostly to see a little MH boost


MH:

Client Side - ETH: ~25MH (Accepting around 20-25 Valid Shares/hour on ethpool). Sia: ~385MH (75-80k Valid Shares/Hr on SiaMining)

Pool Side Screenshots- ETH: https://www.screencast.com/t/ySMnJBLuwE , SIA: https://www.screencast.com/t/qZyq9wv9


Wondering if these results seem normal, or if I could be doing something better?


Thanks!

same thing here

It's been several months I've been mining using Claymore (with only 1 GPU) and currently my shares are getting lower and lower due to the difficulties increase. But for the last week, my shares on dwarfpool are waaaay much lower than what Claymore shows me. As you can see on this picture attached, I should have to got apprx. 280 shares on my last 7 hours mining progress but what my pool shows is only 124 shares submited. I tried to move to another pool and it keep happens to me. I actually have 3 GPU (RX470 & RX570) and I tried each card and result are still the same. What should I do? Is it stale shares? Anyone can help me?

http://imgur.com/fVvTkUk
http://imgur.com/LfskcEs

I am dual mining under linux without any problem, however I faced a couple of time a strange behavior. When my decred pool is down or a connectivity issue is present the entire miner stop mining, my rig is up and accessible via ssh but the miner stop hashing on both coins, this is a "by design" behavior or is there any option I missed that allow the to keep mining ETH and do nothing with decred meantime the connectivity issue persist?

Thanks for your inputs.

Nice! Ty!

Idk mine rx 480 are mining as always no problem with speed

Has anyone else's hashrate essentially halved using RX480?  I was never getting world-class hashrates (~23MH/s) but now it's down around 13MH/s for the two RX 480s that I'm testing. [ETH/ETC mining]  For reference,  I'm dual-mining SiaCoin and that halved as well from 7xx to 3xx.

Disclaimer:  I did install an RX 570 into the system to test,  didn't get the results that I was after so disconnected the card and uninstalled the AMD drivers completely before reinstalling 16.9.2. 

Suggestions?

Theory Question:

Why Decred, Siacoin, Lbry, and Pascal?

I am guessing that Claymore has a large client that wants to mine those coins, but are there other requirements for a coin's hashing algo or miner so that it can be dual mined (easily) by Claymore?

Yes, put -dcri 30 for start ... more is this number more will be the second coin and decrease the eth megahash...

Try with 30-40 or 50 see when you lose not much mh and you will gain more second coin

Dual mining question.
When i do Eth + Drc, i get :
29.5mhs on ETH
and
870 on Dcr

But dual on ETH + Sia, i get
23 mhs on ETH
And
500+ on Sia.

Question.
1. Is this normal?
2. Can i set to higher ETH?

That screen cap is too fuzzy to read but vydelek has two -epool entries, could that be the problem?

Hi guys, currently iam running EWBF CUDA miner, but i would like to try EHT+SIA.
Have 4 diferent rigs with nV 980/980Ti/1070/1080/T-X/T-XP.

some rigs gives me 30 mhs first card and 3mhs for others, another rig gives me 3mh/s for each, so there is some issue.

Is there any of you, who will post working multiple nV config ?

Thx guys !

Can i make work nicehash only with claymore?
Because nicehash like to use another miner with my 1060 while with rx 480 it does work with claymore always mining eth

Nicehash?
You can mine dual with nicehash? Doesn't it do when it want?

Version 9.4 and the same problem :-(

Use latest version of the miner.

I have the same problem. Interestingly, it's only on new GTX 1060 revisions and on Stock Frequency. I have ASUS, MSI different versions and all the same error and I can not figure out what it is.

12:33:19:093   1b94   parse packet: 242
12:33:19:093   1b94   ETH: job is the same
12:33:19:108   1b94   new buf size: 0
12:33:22:124   1a9c   GPU 5, GpuMiner cu_k1 failed 4, unspecified launch failure
12:33:22:124   1a9c   GPU 5, GpuMiner kx failed 1
12:33:22:124   1a9c   Set global fail flag, failed GPU5
12:33:22:140   1704   GPU 2, GpuMiner cu_k1 failed 4, unspecified launch failure
12:33:22:140   734   GPU 1, GpuMiner cu_k1 failed 4, unspecified launch failure
12:33:22:140   1704   GPU 2, GpuMiner kx failed 1
12:33:22:155   1a9c   GPU 5 failed
12:33:22:155   178c   GPU 0, GpuMiner cu_k1 failed 4, unspecified launch failure
12:33:22:155   734   GPU 1, GpuMiner kx failed 1
12:33:22:171   734   Set global fail flag, failed GPU1
12:33:22:171   734   GPU 1 failed
12:33:22:171   178c   GPU 0, GpuMiner kx failed 1
12:33:22:187   1e28   GPU 5, GpuMiner cu_k1 failed 4, unspecified launch failure
12:33:22:155   1704   Set global fail flag, failed GPU2
12:33:22:187   1704   GPU 2 failed
12:33:22:202   1754   GPU 2, GpuMiner cu_k1 failed 4, unspecified launch failure
12:33:22:187   178c   Set global fail flag, failed GPU0
12:33:22:202   178c   GPU 0 failed
12:33:22:202   740   GPU 0, GpuMiner cu_k1 failed 4, unspecified launch failure
12:33:22:218   1e28   GPU 5, GpuMiner kx failed 1
12:33:22:218   45c   GPU 1, GpuMiner cu_k1 failed 4, unspecified launch failure
12:33:22:218   45c   GPU 1, GpuMiner kx failed 1
12:33:22:234   17f4   GPU 4, GpuMiner cu_k1 failed 4, unspecified launch failure
12:33:22:234   17f4   GPU 4, GpuMiner kx failed 1
12:33:22:249   740   GPU 0, GpuMiner kx failed 1
12:33:22:218   1e28   Set global fail flag, failed GPU5
12:33:22:249   1e28   GPU 5 failed
12:33:22:249   17f4   Set global fail flag, failed GPU4
12:33:22:280   17f4   GPU 4 failed
12:33:22:296   16fc   GPU 4, GpuMiner cu_k1 failed 4, unspecified launch failure
12:33:22:296   16fc   GPU 4, GpuMiner kx failed 1
12:33:22:296   1728   GPU 3, GpuMiner cu_k1 failed 4, unspecified launch failure
12:33:22:327   1728   GPU 3, GpuMiner kx failed 1
12:33:22:327   1754   GPU 2, GpuMiner kx failed 1
12:33:22:327   1728   Set global fail flag, failed GPU3
12:33:22:296   16fc   Set global fail flag, failed GPU4
12:33:22:343   16fc   GPU 4 failed
12:33:22:327   1754   Set global fail flag, failed GPU2
12:33:22:343   1754   GPU 2 failed
12:33:22:359   1728   GPU 3 failed
12:33:22:359   15d8   GPU 3, GpuMiner cu_k1 failed 4, unspecified launch failure
12:33:22:234   45c   Set global fail flag, failed GPU1
12:33:22:374   45c   GPU 1 failed
12:33:22:249   740   Set global fail flag, failed GPU0
12:33:22:374   740   GPU 0 failed
12:33:22:391   15d8   GPU 3, GpuMiner kx failed 1
12:33:22:391   15d8   Set global fail flag, failed GPU3
12:33:22:391   15d8   GPU 3 failed
12:33:28:719   1b94   send: {"id":6,"jsonrpc":"2.0","method":"eth_submitHashrate","params":["0x0", "0x00000000000000000000000000000000000000000000000000000000717c0a3e"]}