Note that unless the firmware issues were fixed (your 2 working ones look to be buggy still), you'll still need the workarounds in README.ASIC.
i dont mind the bug workarounds. i just want them to start hashing
Topic: IN STOCK - OneStringMiner boards, up to 39GH/s last ITEMS: from US$15...FUN!!! - page 2. (Read 38819 times)
July 25, 2014, 01:17:04 AM
i dont mind the bug workarounds. i just want them to start hashing
July 25, 2014, 12:54:09 AM
Note that unless the firmware issues were fixed (your 2 working ones look to be buggy still), you'll still need the workarounds in README.ASIC.
July 25, 2014, 12:51:55 AM
can you point me in the direction of the latest FW for these guys and a manual to update. I have 5 boards total and am migrating to bfgminer. It can detect all 5 but three of them present a very long timeout that prevents them from initializing.
I dont know if its differences in FW since they may be from different batches by looking at the serial numbers.
so it seems that the first two boards are recognized fine, and with the additional parameters, the operate excellent at ~30Ghash; but the other three( from a single subsequent purchase) timeout on detection.
I dont know if its differences in FW since they may be from different batches by looking at the serial numbers.
Code:
[2014-07-25 12:32:38] bi•fury by c-scape (driver=bifury; procs=2; serial=14140f3e0211c51; path=/dev/ttyACM3)
[2014-07-25 12:32:38] bi•fury by c-scape (driver=bifury; procs=2; serial=14140d020211d3a; path=/dev/ttyACM4)
so it seems that the first two boards are recognized fine, and with the additional parameters, the operate excellent at ~30Ghash; but the other three( from a single subsequent purchase) timeout on detection.
Code:
pi@raspberrypi ~/repos/bfgminer $ sudo ./bfgminer -d? -D -T
[2014-07-25 12:32:30] setrlimit: Soft fd limit not being changed from 1024 (FD_SETSIZE=1024; hard limit=4096)
[2014-07-25 12:32:30] Started bfgminer 4.4.0-96-gfcebd10
[2014-07-25 12:32:32] usb_devinfo_scan: Error getting USB string 2 (iProduct) from usb:001:004: LIBUSB_ERROR_IO
[2014-07-25 12:32:32] lowlevel_scan: Found usb device at usb:001:010 (path=(null), vid=0835, pid=8500, manuf=Action Star, prod=USB2.0 Hub, serial=(null))
[2014-07-25 12:32:32] lowlevel_scan: Found usb device at usb:001:065 (path=(null), vid=198c, pid=b1f1, manuf=c-scape, prod=bi?fury, serial=1919f5350371067)
[2014-07-25 12:32:32] lowlevel_scan: Found usb device at usb:001:064 (path=(null), vid=198c, pid=b1f1, manuf=c-scape, prod=bi?fury, serial=14140a100211d13)
[2014-07-25 12:32:32] lowlevel_scan: Found usb device at usb:001:063 (path=(null), vid=198c, pid=b1f1, manuf=c-scape, prod=bi?fury, serial=1414f5300211c06)
[2014-07-25 12:32:32] lowlevel_scan: Found usb device at usb:001:006 (path=(null), vid=0835, pid=8501, manuf=Action Star, prod=USB HID, serial=(null))
[2014-07-25 12:32:32] lowlevel_scan: Found usb device at usb:001:005 (path=(null), vid=0835, pid=8500, manuf=Action Star, prod=USB2.0 Hub, serial=(null))
[2014-07-25 12:32:32] lowlevel_scan: Found usb device at usb:001:004 (path=(null), vid=7392, pid=7811, manuf=Realtek, prod=(null), serial=00e04c000001)
[2014-07-25 12:32:32] lowlevel_scan: Found usb device at usb:001:003 (path=(null), vid=0424, pid=ec00, manuf=(null), prod=(null), serial=(null))
[2014-07-25 12:32:32] lowlevel_scan: Found usb device at usb:001:015 (path=(null), vid=198c, pid=b1f1, manuf=c-scape, prod=bi?fury, serial=14140d020211d3a)
[2014-07-25 12:32:32] lowlevel_scan: Found usb device at usb:001:014 (path=(null), vid=0403, pid=6014, manuf=Butterfly Labs, prod=BitFORCE SHA256 SC, serial=FTX1MR7A)
[2014-07-25 12:32:32] lowlevel_scan: Found usb device at usb:001:013 (path=(null), vid=0403, pid=6014, manuf=Butterfly Labs, prod=BitFORCE SHA256 SC, serial=FTWX0FMD)
[2014-07-25 12:32:32] lowlevel_scan: Found usb device at usb:001:012 (path=(null), vid=198c, pid=b1f1, manuf=c-scape, prod=bi?fury, serial=14140f3e0211c51)
[2014-07-25 12:32:32] lowlevel_scan: Found usb device at usb:001:011 (path=(null), vid=0835, pid=8502, manuf=Action Star, prod=USB HID, serial=(null))
[2014-07-25 12:32:32] lowlevel_scan: Found usb device at usb:001:001 (path=(null), vid=1d6b, pid=0002, manuf=Linux 3.12.22+ dwc_otg_hcd, prod=DWC OTG Controller, serial=bcm2708_usb)
[2014-07-25 12:32:32] lowlevel_scan: Found usb device at usb:001:002 (path=(null), vid=0424, pid=9512, manuf=(null), prod=(null), serial=(null))
[2014-07-25 12:32:32] lowlevel_scan: Found vcom device at dev_t:02a6000000000000 (path=/dev/ttyACM2, vid=0000, pid=0000, manuf=c-scape, prod=bi•fury, serial=1919f5350371067)
[2014-07-25 12:32:32] lowlevel_scan: Found vcom device at dev_t:01a6000000000000 (path=/dev/ttyACM1, vid=0000, pid=0000, manuf=c-scape, prod=bi•fury, serial=14140a100211d13)
[2014-07-25 12:32:32] lowlevel_scan: Found vcom device at dev_t:00a6000000000000 (path=/dev/ttyACM0, vid=0000, pid=0000, manuf=c-scape, prod=bi•fury, serial=1414f5300211c06)
[2014-07-25 12:32:32] lowlevel_scan: Found vcom device at dev_t:04a6000000000000 (path=/dev/ttyACM4, vid=0000, pid=0000, manuf=c-scape, prod=bi•fury, serial=14140d020211d3a)
[2014-07-25 12:32:32] lowlevel_scan: Found vcom device at dev_t:01bc000000000000 (path=/dev/ttyUSB1, vid=0000, pid=0000, manuf=Butterfly Labs, prod=BitFORCE SHA256 SC, serial=FTX1MR7A)
[2014-07-25 12:32:32] lowlevel_scan: Found vcom device at dev_t:00bc000000000000 (path=/dev/ttyUSB0, vid=0000, pid=0000, manuf=Butterfly Labs, prod=BitFORCE SHA256 SC, serial=FTWX0FMD)
[2014-07-25 12:32:32] lowlevel_scan: Found vcom device at dev_t:03a6000000000000 (path=/dev/ttyACM3, vid=0000, pid=0000, manuf=c-scape, prod=bi•fury, serial=14140f3e0211c51)
[2014-07-25 12:32:32] BFL: Attempting to open /dev/ttyUSB1
[2014-07-25 12:32:32] Acquired exclusive advisory lock on /dev/ttyACM2
[2014-07-25 12:32:32] Acquired exclusive advisory lock on /dev/ttyACM1
[2014-07-25 12:32:32] BFL: Attempting to open /dev/ttyUSB0
[2014-07-25 12:32:32] bifury: Successfully opened /dev/ttyACM1
[2014-07-25 12:32:32] Acquired exclusive advisory lock on /dev/ttyACM0
[2014-07-25 12:32:32] bifury: Successfully opened /dev/ttyACM2
[2014-07-25 12:32:32] bifury: Successfully opened /dev/ttyACM0
[2014-07-25 12:32:32] Acquired exclusive advisory lock on /dev/ttyUSB1
[2014-07-25 12:32:32] Acquired exclusive advisory lock on /dev/ttyUSB0
[2014-07-25 12:32:32] Acquired exclusive advisory lock on /dev/ttyACM3
[2014-07-25 12:32:32] bifury: Successfully opened /dev/ttyACM3
[2014-07-25 12:32:32] Found BitForce device on /dev/ttyUSB0
[2014-07-25 12:32:32] Found BitForce device on /dev/ttyUSB1
[2014-07-25 12:32:32] DEVICE: Chili SC
[2014-07-25 12:32:32] DEVICE: Chili SC
[2014-07-25 12:32:32] MANUFACTURER: MrTeal and ChipGeek
[2014-07-25 12:32:32] MANUFACTURER: MrTeal and ChipGeek
[2014-07-25 12:32:32] FIRMWARE: 1.2.14e
[2014-07-25 12:32:32] CHIP PARALLELIZATION: NO
[2014-07-25 12:32:32] FIRMWARE: 1.2.14e
[2014-07-25 12:32:32] QUEUE DEPTH:40
[2014-07-25 12:32:32] CHIP PARALLELIZATION: NO
[2014-07-25 12:32:32] PROCESSOR 0: 13 engines @ 313 MHz -- MAP: AFFD
[2014-07-25 12:32:32] QUEUE DEPTH:40
[2014-07-25 12:32:32] PROCESSOR 1: 16 engines @ 305 MHz -- MAP: FFFF
[2014-07-25 12:32:32] PROCESSOR 0: 14 engines @ 282 MHz -- MAP: DFFE
[2014-07-25 12:32:32] PROCESSOR 2: 12 engines @ 293 MHz -- MAP: 7BE7
[2014-07-25 12:32:32] PROCESSOR 1: 15 engines @ 269 MHz -- MAP: FEFF
[2014-07-25 12:32:32] Timers: Using clock_gettime(CLOCK_MONOTONIC_RAW)
[2014-07-25 12:32:32] PROCESSOR 2: 13 engines @ 280 MHz -- MAP: FEEB
[2014-07-25 12:32:32] PROCESSOR 3: 15 engines @ 296 MHz -- MAP: FF7F
[2014-07-25 12:32:32] PROCESSOR 3: 13 engines @ 289 MHz -- MAP: DAFF
[2014-07-25 12:32:32] Acquired exclusive advisory lock on /dev/ttyACM4
[2014-07-25 12:32:32] bifury: Successfully opened /dev/ttyACM4
[2014-07-25 12:32:32] PROCESSOR 4: 16 engines @ 277 MHz -- MAP: FFFF
[2014-07-25 12:32:32] PROCESSOR 5: 16 engines @ 213 MHz -- MAP: FFFF
[2014-07-25 12:32:32] PROCESSOR 4: 15 engines @ 308 MHz -- MAP: FFFD
[2014-07-25 12:32:32] PROCESSOR 6: 14 engines @ 307 MHz -- MAP: F3FF
[2014-07-25 12:32:32] PROCESSOR 5: 14 engines @ 307 MHz -- MAP: F7F7
[2014-07-25 12:32:32] PROCESSOR 7: 15 engines @ 308 MHz -- MAP: BFFF
[2014-07-25 12:32:32] PROCESSOR 6: 15 engines @ 255 MHz -- MAP: FFF7
[2014-07-25 12:32:32] THEORETICAL MAX: 33.66 GH/s
[2014-07-25 12:32:32] ENGINES: 117
[2014-07-25 12:32:32] FREQUENCY: 287 MHz
[2014-07-25 12:32:32] CRITICAL TEMPERATURE: 0
[2014-07-25 12:32:32] PROCESSOR 7: 16 engines @ 283 MHz -- MAP: FFFF
[2014-07-25 12:32:32] TOTAL THERMAL CYCLES: 0
[2014-07-25 12:32:32] THEORETICAL MAX: 32.65 GH/s
[2014-07-25 12:32:32] XLINK MODE: MASTER
[2014-07-25 12:32:32] ENGINES: 115
[2014-07-25 12:32:32] XLINK PRESENT: NO
[2014-07-25 12:32:32] FREQUENCY: 283 MHz
[2014-07-25 12:32:32] CRITICAL TEMPERATURE: 0
[2014-07-25 12:32:32] TOTAL THERMAL CYCLES: 0
[2014-07-25 12:32:32] XLINK MODE: MASTER
[2014-07-25 12:32:32] XLINK PRESENT: NO
[2014-07-25 12:32:32] bifury: Found firmware 1.2 on hardware rev 1 with 2 chips
[2014-07-25 12:32:32] bifury: Found firmware 1.2 on hardware rev 1 with 2 chips
[2014-07-25 12:32:34] bifury: Timed out waiting for response to version request
[2014-07-25 12:32:34] bifury: Timed out waiting for response to version request
[2014-07-25 12:32:34] bifury: Timed out waiting for response to version request
[2014-07-25 12:32:34] Device rescan requested
[2014-07-25 12:32:35] usb_devinfo_scan: Error getting USB string 2 (iProduct) from usb:001:004: LIBUSB_ERROR_IO
[2014-07-25 12:32:35] lowlevel_scan: Found usb device at usb:001:010 (path=(null), vid=0835, pid=8500, manuf=Action Star, prod=USB2.0 Hub, serial=(null))
[2014-07-25 12:32:35] lowlevel_scan: Found usb device at usb:001:065 (path=(null), vid=198c, pid=b1f1, manuf=c-scape, prod=bi?fury, serial=1919f5350371067)
[2014-07-25 12:32:35] lowlevel_scan: Found usb device at usb:001:064 (path=(null), vid=198c, pid=b1f1, manuf=c-scape, prod=bi?fury, serial=14140a100211d13)
[2014-07-25 12:32:35] lowlevel_scan: Found usb device at usb:001:063 (path=(null), vid=198c, pid=b1f1, manuf=c-scape, prod=bi?fury, serial=1414f5300211c06)
[2014-07-25 12:32:35] lowlevel_scan: Found usb device at usb:001:006 (path=(null), vid=0835, pid=8501, manuf=Action Star, prod=USB HID, serial=(null))
[2014-07-25 12:32:35] lowlevel_scan: Found usb device at usb:001:005 (path=(null), vid=0835, pid=8500, manuf=Action Star, prod=USB2.0 Hub, serial=(null))
[2014-07-25 12:32:35] lowlevel_scan: Found usb device at usb:001:004 (path=(null), vid=7392, pid=7811, manuf=Realtek, prod=(null), serial=00e04c000001)
[2014-07-25 12:32:35] lowlevel_scan: Found usb device at usb:001:003 (path=(null), vid=0424, pid=ec00, manuf=(null), prod=(null), serial=(null))
[2014-07-25 12:32:35] lowlevel_scan: Found usb device at usb:001:015 (path=(null), vid=198c, pid=b1f1, manuf=c-scape, prod=bi?fury, serial=14140d020211d3a)
[2014-07-25 12:32:35] lowlevel_scan: Found usb device at usb:001:014 (path=(null), vid=0403, pid=6014, manuf=Butterfly Labs, prod=BitFORCE SHA256 SC, serial=FTX1MR7A)
[2014-07-25 12:32:35] lowlevel_scan: Found usb device at usb:001:013 (path=(null), vid=0403, pid=6014, manuf=Butterfly Labs, prod=BitFORCE SHA256 SC, serial=FTWX0FMD)
[2014-07-25 12:32:35] lowlevel_scan: Found usb device at usb:001:012 (path=(null), vid=198c, pid=b1f1, manuf=c-scape, prod=bi?fury, serial=14140f3e0211c51)
[2014-07-25 12:32:35] lowlevel_scan: Found usb device at usb:001:011 (path=(null), vid=0835, pid=8502, manuf=Action Star, prod=USB HID, serial=(null))
[2014-07-25 12:32:35] lowlevel_scan: Found usb device at usb:001:001 (path=(null), vid=1d6b, pid=0002, manuf=Linux 3.12.22+ dwc_otg_hcd, prod=DWC OTG Controller, serial=bcm2708_usb)
[2014-07-25 12:32:35] lowlevel_scan: Found usb device at usb:001:002 (path=(null), vid=0424, pid=9512, manuf=(null), prod=(null), serial=(null))
[2014-07-25 12:32:35] lowlevel_scan: Found vcom device at dev_t:02a6000000000000 (path=/dev/ttyACM2, vid=0000, pid=0000, manuf=c-scape, prod=bi•fury, serial=1919f5350371067)
[2014-07-25 12:32:35] lowlevel_scan: Found vcom device at dev_t:01a6000000000000 (path=/dev/ttyACM1, vid=0000, pid=0000, manuf=c-scape, prod=bi•fury, serial=14140a100211d13)
[2014-07-25 12:32:35] lowlevel_scan: Found vcom device at dev_t:00a6000000000000 (path=/dev/ttyACM0, vid=0000, pid=0000, manuf=c-scape, prod=bi•fury, serial=1414f5300211c06)
[2014-07-25 12:32:35] lowlevel_scan: Found vcom device at dev_t:04a6000000000000 (path=/dev/ttyACM4, vid=0000, pid=0000, manuf=c-scape, prod=bi•fury, serial=14140d020211d3a)
[2014-07-25 12:32:35] lowlevel_scan: Found vcom device at dev_t:01bc000000000000 (path=/dev/ttyUSB1, vid=0000, pid=0000, manuf=Butterfly Labs, prod=BitFORCE SHA256 SC, serial=FTX1MR7A)
[2014-07-25 12:32:35] lowlevel_scan: Found vcom device at dev_t:00bc000000000000 (path=/dev/ttyUSB0, vid=0000, pid=0000, manuf=Butterfly Labs, prod=BitFORCE SHA256 SC, serial=FTWX0FMD)
[2014-07-25 12:32:35] lowlevel_scan: Found vcom device at dev_t:03a6000000000000 (path=/dev/ttyACM3, vid=0000, pid=0000, manuf=c-scape, prod=bi•fury, serial=14140f3e0211c51)
[2014-07-25 12:32:35] Acquired exclusive advisory lock on /dev/ttyACM2
[2014-07-25 12:32:35] Acquired exclusive advisory lock on /dev/ttyACM1
[2014-07-25 12:32:35] Acquired exclusive advisory lock on /dev/ttyACM0
[2014-07-25 12:32:35] probe_device_thread: "BitFORCE SHA256 SC" already in use
[2014-07-25 12:32:35] probe_device_thread: "BitFORCE SHA256 SC" already in use
[2014-07-25 12:32:35] bifury: Successfully opened /dev/ttyACM2
[2014-07-25 12:32:35] probe_device_thread: "bi•fury" already in use
[2014-07-25 12:32:35] probe_device_thread: "bi•fury" already in use
[2014-07-25 12:32:36] bifury: Successfully opened /dev/ttyACM0
[2014-07-25 12:32:36] bifury: Successfully opened /dev/ttyACM1
[2014-07-25 12:32:38] bifury: Timed out waiting for response to version request
[2014-07-25 12:32:38] bifury: Timed out waiting for response to version request
[2014-07-25 12:32:38] bifury: Timed out waiting for response to version request
[2014-07-25 12:32:38] Device rescan requested a second time, delaying
[2014-07-25 12:32:38] schedule_rescan: Scheduling rescan (no rescans currently pending)
[2014-07-25 12:32:38] Devices detected:
[2014-07-25 12:32:38] BitForce SHA256 SC 1.0 (driver=bitforce_queue; procs=1; serial=FTX1MR7A; path=/dev/ttyUSB1)
[2014-07-25 12:32:38] BitForce SHA256 SC 1.0 (driver=bitforce_queue; procs=1; serial=FTWX0FMD; path=/dev/ttyUSB0)
[2014-07-25 12:32:38] bi•fury by c-scape (driver=bifury; procs=2; serial=14140f3e0211c51; path=/dev/ttyACM3)
[2014-07-25 12:32:38] bi•fury by c-scape (driver=bifury; procs=2; serial=14140d020211d3a; path=/dev/ttyACM4)
4 devices listed
July 18, 2014, 12:04:18 AM
Just want to share my opinion about these boards; they rock! Got a DIY1 and DIY2 for about two weeks and i'm very happy with them. Best mining investment i've done so far. Very stable, quiet, easy to assemble and the build quality is really high.
One little question; does anybody know the cgminer config setting or parameter to control the fan speed? It is very quiet, but i believe it still can miss a couple of RPM's
Thanks for your compliments. The fan is not speed controlled, the hardware has no circuitry for it. If you want the fan to spin slower, buy a fan with a lower rpm spec. One little question; does anybody know the cgminer config setting or parameter to control the fan speed? It is very quiet, but i believe it still can miss a couple of RPM's
July 17, 2014, 04:34:50 PM
Just want to share my opinion about these boards; they rock! Got a DIY1 and DIY2 for about two weeks and i'm very happy with them. Best mining investment i've done so far. Very stable, quiet, easy to assemble and the build quality is really high.
One little question; does anybody know the cgminer config setting or parameter to control the fan speed? It is very quiet, but i believe it still can miss a couple of RPM's
One little question; does anybody know the cgminer config setting or parameter to control the fan speed? It is very quiet, but i believe it still can miss a couple of RPM's
July 17, 2014, 05:21:31 AM
It's a nice sunny day here in Holland, so I am in a good mood 
and lowered the prices.
Still too much for people looking for a quick ROI, but good for people in it for the long run with these power sipping boards.
If you order at least 10 of a mix (or 10 the same) of the products below, these are the prices a piece including shipment:
If paid in BTC(https://bitpay.com/bitcoin-exchange-rates) we ship the same or next business day.
Bank transfer is possible, but takes longer.
FedEx is handling the shipment.
In exceptional cases I might have to charge you extra to pay part of the shipment cost.
Please keep in mind that the heat sinks are heavy so the shipment cost(included in the prices above) is higher.
You can still make me an offer.
How to bid/order: fill in and email the list below to [email protected]. You'll receive a reply within 24 hours.
Name:
Address:
Zipcode:
City:
Country:
Phone number:
To apply for 0% VAT, specify your VAT number:
Your order reference:
#DIY:
#DIY0:
#DIY1:
#DIY2:
Your bid/expected amount to pay in BTC(including shipment):
Mandatory items are underlined.
and lowered the prices. Still too much for people looking for a quick ROI, but good for people in it for the long run with these power sipping boards.
If you order at least 10 of a mix (or 10 the same) of the products below, these are the prices a piece including shipment:
| Product | #boards | GH/s | outside EU price in $ | price including VAT inside EU | price excluding VAT for business owners | |||||
| DIY | 1 | 25+ | $59.99 | €53.64 | €44.33 | |||||
| DIY0 | 1 | 25+ | $64.99 | €58.11 | €48.03 | |||||
| DIY1 | 1 | 30+ | $74.99 | €67.05 | €55.42 | |||||
| DIY2 | 2 | 60+ | $139.99 | €125.18 | €103.45 |
If paid in BTC(https://bitpay.com/bitcoin-exchange-rates) we ship the same or next business day.
Bank transfer is possible, but takes longer.
FedEx is handling the shipment.
In exceptional cases I might have to charge you extra to pay part of the shipment cost.
Please keep in mind that the heat sinks are heavy so the shipment cost(included in the prices above) is higher.
You can still make me an offer.
How to bid/order: fill in and email the list below to [email protected]. You'll receive a reply within 24 hours.
Name:
Address:
Zipcode:
City:
Country:
Phone number:
To apply for 0% VAT, specify your VAT number:
Your order reference:
#DIY:
#DIY0:
#DIY1:
#DIY2:
Your bid/expected amount to pay in BTC(including shipment):
Mandatory items are underlined.
July 17, 2014, 12:50:36 AM
Mr Turas are there any of these left?
Good day mr. Taugeran. Yes, I have DIY, DIY0, DIY1 and DIY2 in stock. July 17, 2014, 12:45:53 AM
Mr Turas are there any of these left?
June 19, 2014, 01:04:58 AM
Because some people still ask me to make them an offer, here it is:
If you order at least 10 of a mix (or 10 the same) of the products below, these are the prices a piece including shipment:
These prices are the lowest I can go for small 10 piece orders.
This is already below my cost price, don't expect any lower prices any day soon.
Payment in BTC, I use https://bitpay.com/bitcoin-exchange-rates
Bank transfer is possible, but takes longer.
FedEx is handling the shipment.
In exceptional cases I might have to charge you extra to pay part of the shipment cost.
Please keep in mind that the heat sinks are heavy so the shipment cost(included in the prices above) is higher.
You can still make me an offer for bigger amounts.
But please, don't bid 1 BTC for 40 sets, that's a waste of time.
How to bid/order: fill in and email the list below to [email protected]. You'll receive a reply within 24 hours.
Name:
Address:
Zipcode:
City:
Country:
Phone number:
To apply for 0% VAT, specify your VAT number:
Your order reference:
#DIY:
#DIY0:
#DIY1:
#DIY2:
Your bid/expected amount to pay in BTC(including shipment):
Mandatory items are underlined.
If you order at least 10 of a mix (or 10 the same) of the products below, these are the prices a piece including shipment:
| Product | #boards | GH/s | outside EU price in $ | price including VAT inside EU | price excluding VAT for business owners | |||||
| DIY | 1 | 25+ | $69.99 | €62.91 | €51.99 | |||||
| DIY0 | 1 | 25+ | $74.99 | €67.75 | €55.99 | |||||
| DIY1 | 1 | 30+ | $84.99 | €76.22 | €62.99 | |||||
| DIY2 | 2 | 60+ | $159.99 | €142.76 | €117.99 |
These prices are the lowest I can go for small 10 piece orders.
This is already below my cost price, don't expect any lower prices any day soon.
Payment in BTC, I use https://bitpay.com/bitcoin-exchange-rates
Bank transfer is possible, but takes longer.
FedEx is handling the shipment.
In exceptional cases I might have to charge you extra to pay part of the shipment cost.
Please keep in mind that the heat sinks are heavy so the shipment cost(included in the prices above) is higher.
You can still make me an offer for bigger amounts.
But please, don't bid 1 BTC for 40 sets, that's a waste of time.
How to bid/order: fill in and email the list below to [email protected]. You'll receive a reply within 24 hours.
Name:
Address:
Zipcode:
City:
Country:
Phone number:
To apply for 0% VAT, specify your VAT number:
Your order reference:
#DIY:
#DIY0:
#DIY1:
#DIY2:
Your bid/expected amount to pay in BTC(including shipment):
Mandatory items are underlined.
June 18, 2014, 04:15:13 AM
Fire still hot?
Our school might be interested in one or two of the last DIY units Ben so the students can do some assembly and running of miners for altcoins. My FPGAs blew a gasket in 2013 so need something cheap and easy the students and work with if you have any left.
How about if I send you 10 boards that are either broken or not hashing the minimum 25GH/s that I sell them for ?Our school might be interested in one or two of the last DIY units Ben so the students can do some assembly and running of miners for altcoins. My FPGAs blew a gasket in 2013 so need something cheap and easy the students and work with if you have any left.
Just bare boards, so it's really SDIY (students do it yourself)
Drop me a PM / Email. I think I have to check our budget for this first but ya that is fun... trying to make em work. We will be mining alts and solo etc for practice. Setting up wallets etc. So what I can afford. I will not need them asap as we are off till August 18th.
That be nice Ben... but we can work something out. We will cover shipping of course.
June 18, 2014, 03:53:49 AM
Fire still hot?
Our school might be interested in one or two of the last DIY units Ben so the students can do some assembly and running of miners for altcoins. My FPGAs blew a gasket in 2013 so need something cheap and easy the students and work with if you have any left.
How about if I send you 10 boards that are either broken or not hashing the minimum 25GH/s that I sell them for ?Our school might be interested in one or two of the last DIY units Ben so the students can do some assembly and running of miners for altcoins. My FPGAs blew a gasket in 2013 so need something cheap and easy the students and work with if you have any left.
Just bare boards, so it's really SDIY (students do it yourself)
Drop me a PM / Email. I think I have to check our budget for this first but ya that is fun... trying to make em work. We will be mining alts and solo etc for practice. Setting up wallets etc. So what I can afford. I will not need them asap as we are off till August 18th.
That be nice Ben... but we can work something out as it would be good as we have a budget for stuff like this. Or the kids can pay back some of the coins we mine and learn how to send coins etc. We will cover shipping of course.
June 18, 2014, 03:19:18 AM
Fire still hot?
Our school might be interested in one or two of the last DIY units Ben so the students can do some assembly and running of miners for altcoins. My FPGAs blew a gasket in 2013 so need something cheap and easy the students and work with if you have any left.
How about if I send you 10 boards that are either broken or not hashing the minimum 25GH/s that I sell them for ?Our school might be interested in one or two of the last DIY units Ben so the students can do some assembly and running of miners for altcoins. My FPGAs blew a gasket in 2013 so need something cheap and easy the students and work with if you have any left.
Just bare boards, so it's really SDIY (students do it yourself)
Drop me a PM / Email. I think I have to check our budget for this first but ya that is fun... trying to make em work. We will be mining alts and solo etc for practice. Setting up wallets etc. So what I can afford. I will not need them asap as we are off till August 18th.
June 18, 2014, 03:17:22 AM
Fire still hot?
Our school might be interested in one or two of the last DIY units Ben so the students can do some assembly and running of miners for altcoins. My FPGAs blew a gasket in 2013 so need something cheap and easy the students and work with if you have any left.
How about if I send you 10 boards that are either broken or not hashing the minimum 25GH/s that I sell them for ?Our school might be interested in one or two of the last DIY units Ben so the students can do some assembly and running of miners for altcoins. My FPGAs blew a gasket in 2013 so need something cheap and easy the students and work with if you have any left.
Just bare boards, so it's really SDIY (students do it yourself)
Drop me a PM / Email. I think I have to check our budget for this first but ya that is fun... trying to make em work. We will be mining alts and solo etc for practice. Setting up wallets etc. So what I can afford. I will not need them asap as we are off till August 18th.
June 18, 2014, 03:00:28 AM
Fire still hot?
Our school might be interested in one or two of the last DIY units Ben so the students can do some assembly and running of miners for altcoins. My FPGAs blew a gasket in 2013 so need something cheap and easy the students and work with if you have any left.
How about if I send you 10 boards that are either broken or not hashing the minimum 25GH/s that I sell them for ?Our school might be interested in one or two of the last DIY units Ben so the students can do some assembly and running of miners for altcoins. My FPGAs blew a gasket in 2013 so need something cheap and easy the students and work with if you have any left.
Just bare boards, so it's really SDIY (students do it yourself)
June 18, 2014, 02:55:32 AM
Fire still hot?
Our school might be interested in one or two of the last DIY units Ben so the students can do some assembly and running of miners for altcoins. My FPGAs blew a gasket in 2013 so need something cheap and easy the students and work with if you have any left.
Our school might be interested in one or two of the last DIY units Ben so the students can do some assembly and running of miners for altcoins. My FPGAs blew a gasket in 2013 so need something cheap and easy the students and work with if you have any left.
June 17, 2014, 06:20:02 AM
Not everyone understood my fire sale rules, so here it is in one sentence:
Make a bid in BTC for any number of DIY, DIY0, DIY1 or DIY2, include your address(so I can calculate shipping cost) email it to [email protected] and I'll reply.
Make a bid in BTC for any number of DIY, DIY0, DIY1 or DIY2, include your address(so I can calculate shipping cost) email it to [email protected] and I'll reply.
did that several days ago and got no reply.
June 17, 2014, 04:46:20 AM
Not everyone understood my fire sale rules, so here it is in one sentence:
Make a bid in BTC for any number of DIY, DIY0, DIY1 or DIY2, include your address(so I can calculate shipping cost) email it to [email protected] and I'll reply.
Make a bid in BTC for any number of DIY, DIY0, DIY1 or DIY2, include your address(so I can calculate shipping cost) email it to [email protected] and I'll reply.
did that several days ago and got no reply.
June 17, 2014, 01:30:32 AM
Not everyone understood my fire sale rules, so here it is in one sentence:
Make a bid in BTC for any number of DIY, DIY0, DIY1 or DIY2, include your address(so I can calculate shipping cost) email it to [email protected] and I'll reply.
Make a bid in BTC for any number of DIY, DIY0, DIY1 or DIY2, include your address(so I can calculate shipping cost) email it to [email protected] and I'll reply.
June 14, 2014, 06:03:41 PM
Fire sale:
This is the fire sale of the remaining boards.
I have about 40 tested boards ready to be shipped and enough untested ones.
This is the deal: PM me an offer(including shipment) in BTC for any number of DIY/DIY0/DIY1 and/or DIY2 and your complete address and I will get back to you whether or not your offer is acceptable. Shipment will be by FedEx on the next working day at the latest, unless you order more than 50 boards, of which testing will take me a bit longer. If you are in a hurry, you can also make an offer for untested boards.
How to make a bid: fill in and email the list below to [email protected]. You'll receive a reply within 24 hours.
Name:
Address:
Zipcode:
City:
Country:
Phone number:
To apply for 0% VAT, specify your VAT number:
Your order reference:
#DIY:
#DIY0:
#DIY1:
#DIY2:
Your bid in BTC(including shipment):
Mandatory items are underlined.
This is the fire sale of the remaining boards.
I have about 40 tested boards ready to be shipped and enough untested ones.
This is the deal: PM me an offer(including shipment) in BTC for any number of DIY/DIY0/DIY1 and/or DIY2 and your complete address and I will get back to you whether or not your offer is acceptable. Shipment will be by FedEx on the next working day at the latest, unless you order more than 50 boards, of which testing will take me a bit longer. If you are in a hurry, you can also make an offer for untested boards.
How to make a bid: fill in and email the list below to [email protected]. You'll receive a reply within 24 hours.
Name:
Address:
Zipcode:
City:
Country:
Phone number:
To apply for 0% VAT, specify your VAT number:
Your order reference:
#DIY:
#DIY0:
#DIY1:
#DIY2:
Your bid in BTC(including shipment):
Mandatory items are underlined.
June 10, 2014, 03:58:00 PM
We lowered the prices again:
The prices as of June 10th, excluding shipment:
Discount:
When ordering more than one, you will get the following discounts:
1-3 - list price
4-9 5% discount
10-25 7.5% discount
26-100 10% discount
These discounts are for one order and to one shipment address.
Payment options:
- SEPA or international bank transfer
- BTC
- Paypal, alas we have to charge an extra 7.5%; Paypal is just too expensive for small businesses.
All prices EXCLUDE shipping.
The prices as of June 10th, excluding shipment:
| Product | #boards | GH/s | outside EU price in $ | price including VAT inside EU | price excluding VAT for business owners | |||||
| DIY | 1 | 25+ | $89.72 | €79.28 | €65.52 | |||||
| DIY0 | 1 | 25+ | $124.14 | €116.60 | €96.36 | |||||
| DIY1 | 1 | 30+ | $131.96 | €130.61 | €107.94 | |||||
| DIY2 | 2 | 60+ | $261.76 | €245.11 | €202.57 |
Discount:
When ordering more than one, you will get the following discounts:
1-3 - list price
4-9 5% discount
10-25 7.5% discount
26-100 10% discount
These discounts are for one order and to one shipment address.
Payment options:
- SEPA or international bank transfer
- BTC
- Paypal, alas we have to charge an extra 7.5%; Paypal is just too expensive for small businesses.
All prices EXCLUDE shipping.
Jump to: