It's Thursday day now meaning its been a week since I paid. Funds should be in your account. I emailed you a proof of wire transfer from my bank with all the details and info you need. What gives?!
Now I read the thread to get excited about possibly receiving a subpar unit. Great.
Topic: [WORLDWIDE]Bitmine - 950 GH/S 1500 USD - Next day delivery. - page 35. (Read 59959 times)
We identified the problem with units, its old firmware with control unit , the new units are updated.
Yeah, I'm not sure what the issue is. It's not like the chips are bad or the temp is too high. We'll see what the performance is of the other units after people receive them.
Cheap components, poor quality power supply components in blade maybe board wont give enough juice to chips. Was this unit powered by only 1 psu? 160 avalon chips need 1000W from wall to run. But let it ride least 30minutes to 1 hour and see how the numbers go they should get steady when all chips get enough juice.
only 1300 freq and HWrate 20% 
my similar clone is going here 1500 freq with 4.5% hwrate +220GH/s
my similar clone is going here 1500 freq with 4.5% hwrate +220GH/s
Yeah, I'm not sure what the issue is. It's not like the chips are bad or the temp is too high. We'll see what the performance is of the other units after people receive them.
All your worker doesnt seems like its hashing at the same speed. See worker no. 12.
Run it a bit longer, and check again.
only 1300 freq and HWrate 20%
my similar clone is going here 1500 freq with 4.5% hwrate +220GH/s
my similar clone is going here 1500 freq with 4.5% hwrate +220GH/s
Yeah, I'm not sure what the issue is. It's not like the chips are bad or the temp is too high. We'll see what the performance is of the other units after people receive them.
only 1300 freq and HWrate 20%
my similar clone is going here 1500 freq with 4.5% hwrate +220GH/s
[STATS0] =>
(
[STATS] => 0
[ID] => AVA0
[Elapsed] => 15863
[Calls] => 0
[Wait] => 0.000000
[Max] => 0.000000
[Min] => 99999999.000000
[baud] => 115200
[miner_count] => 16
[asic_count] => 10
[timeout] => 8
[frequency] => 1500
[fan1] => 2520
[fan2] => 2640
[fan3] => 0
[temp1] => 24
[temp2] => 37
[temp3] => -1
[temp_max] => 38
[Device Hardware%] => 4.1254
[no_matching_work] => 13005
[match_work_count1] => 55001
[match_work_count2] => 54729
[match_work_count3] => 55046
[match_work_count4] => 55009
[match_work_count5] => 55000
[match_work_count6] => 54731
[match_work_count7] => 54814
[match_work_count8] => 55202
[match_work_count9] => 54847
[match_work_count10] => 53782
[match_work_count11] => 54155
[match_work_count12] => 54656
[match_work_count13] => 54224
[match_work_count14] => 53955
[match_work_count15] => 54257
[match_work_count16] => 54154
[Controller Version] => 0
[Avalon Chip] => 55
[USB Pipe] => 0
[USB Delay] => r0 0.000000 w0 0.000000
[USB tmo] => 4870725 0
my similar clone is going here 1500 freq with 4.5% hwrate +220GH/s
[STATS0] =>
(
[STATS] => 0
[ID] => AVA0
[Elapsed] => 15863
[Calls] => 0
[Wait] => 0.000000
[Max] => 0.000000
[Min] => 99999999.000000
[baud] => 115200
[miner_count] => 16
[asic_count] => 10
[timeout] => 8
[frequency] => 1500
[fan1] => 2520
[fan2] => 2640
[fan3] => 0
[temp1] => 24
[temp2] => 37
[temp3] => -1
[temp_max] => 38
[Device Hardware%] => 4.1254
[no_matching_work] => 13005
[match_work_count1] => 55001
[match_work_count2] => 54729
[match_work_count3] => 55046
[match_work_count4] => 55009
[match_work_count5] => 55000
[match_work_count6] => 54731
[match_work_count7] => 54814
[match_work_count8] => 55202
[match_work_count9] => 54847
[match_work_count10] => 53782
[match_work_count11] => 54155
[match_work_count12] => 54656
[match_work_count13] => 54224
[match_work_count14] => 53955
[match_work_count15] => 54257
[match_work_count16] => 54154
[Controller Version] => 0
[Avalon Chip] => 55
[USB Pipe] => 0
[USB Delay] => r0 0.000000 w0 0.000000
[USB tmo] => 4870725 0
They are all hashing so no chips are bad but the error rate is too high at the higher frequencies --
[STATS0] =>
(
[STATS] => 0
[ID] => AVA0
[Elapsed] => 275
[Calls] => 0
[Wait] => 0.000000
[Max] => 0.000000
[Min] => 99999999.000000
[baud] => 115200
[miner_count] => 16
[asic_count] => 10
[timeout] => 9
[frequency] => 1300
[fan1] => 0
[fan2] => 3960
[fan3] => 0
[temp1] => 21
[temp2] => 36
[temp3] => -1
[temp_max] => 36
[Device Hardware%] => 21.2134
[no_matching_work] => 186
[match_work_count1] => 809
[match_work_count2] => 820
[match_work_count3] => 814
[match_work_count4] => 822
[match_work_count5] => 844
[match_work_count6] => 776
[match_work_count7] => 851
[match_work_count8] => 787
[match_work_count9] => 797
[match_work_count10] => 840
[match_work_count11] => 845
[match_work_count12] => 1619
[match_work_count13] => 758
[match_work_count14] => 798
[match_work_count15] => 1083
[match_work_count16] => 891
[Controller Version] => 0
[Avalon Chip] => 55
[USB Pipe] => 0
[USB Delay] => r0 0.000000 w0 0.000000
[USB tmo] => 97498 0
)
[STATS0] =>
(
[STATS] => 0
[ID] => AVA0
[Elapsed] => 275
[Calls] => 0
[Wait] => 0.000000
[Max] => 0.000000
[Min] => 99999999.000000
[baud] => 115200
[miner_count] => 16
[asic_count] => 10
[timeout] => 9
[frequency] => 1300
[fan1] => 0
[fan2] => 3960
[fan3] => 0
[temp1] => 21
[temp2] => 36
[temp3] => -1
[temp_max] => 36
[Device Hardware%] => 21.2134
[no_matching_work] => 186
[match_work_count1] => 809
[match_work_count2] => 820
[match_work_count3] => 814
[match_work_count4] => 822
[match_work_count5] => 844
[match_work_count6] => 776
[match_work_count7] => 851
[match_work_count8] => 787
[match_work_count9] => 797
[match_work_count10] => 840
[match_work_count11] => 845
[match_work_count12] => 1619
[match_work_count13] => 758
[match_work_count14] => 798
[match_work_count15] => 1083
[match_work_count16] => 891
[Controller Version] => 0
[Avalon Chip] => 55
[USB Pipe] => 0
[USB Delay] => r0 0.000000 w0 0.000000
[USB tmo] => 97498 0
)
Here are my stats. Getting between 183 - 195 GH. I tried bumping up the frequency but the error count goes too high so it looks like this will be my hashrate unless there is some other tuning I can do.
Are all the chips hashing in cgminer api log. Half speed is 5 chips cold. Zero hashing is all 10 chips cold. Quality issues if some chips are cold from start.
Sent everyone their tracking # please check your email guys.
My boys came through. Got my replacement Power unit and control board and all is well. I commend these guys on actually shipping out replacement parts in a timely fashion. I don't think most other sellers would do that.
Here are my stats. Getting between 183 - 195 GH. I tried bumping up the frequency but the error count goes too high so it looks like this will be my hashrate unless there is some other tuning I can do.
Here are my stats. Getting between 183 - 195 GH. I tried bumping up the frequency but the error count goes too high so it looks like this will be my hashrate unless there is some other tuning I can do.
Quote
Our engineer says its controll unit problem
il send you a new controller unit and pbu , express delivery today.
il send you a new controller unit and pbu , express delivery today.
Awesome, thanks for your responsiveness!
That kind of response is a good sign - please keep us in the loop with this. I'm thinking of getting another avalon clone and not so sure btmine is up to producing any more for me than the one unit I have (and like).
Same deal i got +1TH/s BTmine and i want more. Also we need some spare parts aka blades
i suspect some chips dying.BTmine might stop with Avalon after CNY holidays.
I only need parts 2 blades + tplink and control board. This diyu case is easy to make. So make these parts available cheap. I can assembly the units myself.
Still waiting on a response..... 
Will respond everyone today with tracking # im in hk at themoment renewing My visa and picking up Avalon ic because there is a shortage of them in china.
Not feeling so confident myself. If I do not hear word within 24 hours I will begin disputing the wire transfer. Bit-Tech check your email.
Bit-Tech: .... It's Monday, probably Tuesday in Shenzhen.
This really isn't looking good.
It's Monday.
Sent payment for 1 unit via paypal.
Awaiting confirmation and tracking info.
Thank you
Awaiting confirmation and tracking info.
Thank you
We shipped your stuff on friday, we dont get tracking information during weekends from forwarders, you asked for refund we can refund you however we dont have sufficient bitcoin and we can refund your other shipment with paypal.
You expect a response promptly as if we are robots, we are also humans.
We will refund your money minus 100 USD on each unit that is the cost of stopping a shipment
Regards
Bit-tech
So we will receive tracking number via email on Monday then?
Yes sir
We shipped your stuff on friday, we dont get tracking information during weekends from forwarders, you asked for refund we can refund you however we dont have sufficient bitcoin and we can refund your other shipment with paypal.
You expect a response promptly as if we are robots, we are also humans.
We will refund your money minus 100 USD on each unit that is the cost of stopping a shipment
Regards
Bit-tech
So we will receive tracking number via email on Monday then?
Jump to: