Author

Topic: [ANN][AUTO-SWITCH] Profit-switch auto-exchange pool: CleverMining.com - page 253. (Read 554425 times)

member
Activity: 84
Merit: 10
2hours 3.2+mh 2.9 reported on CM

11% rejects
1,6% stale
And some getworks failures

Whats happening
newbie
Activity: 24
Merit: 0
If you're using the newest cgminer or sgminer, try these settings.  They seem to work quite well for two of my Gigabyte 280x's.  717Kh/s at 709wu each.

-g 2
-w 256
--lookup-gap 2
--xintensity 768 (xintensity has turned out to be exactly what I needed to do minute adjustments to get all my cards working very well with this pool!)
--thread-concurrency 20480 (using the 20480 Lantis bin that comes with the new sgminer)
--gpu-engine 1055
--gpu-memclock 1500
--gpu-powertune 20
--auto-fan
--gpu-fan 30-85 (I had to set this a few months back because one card kept staying so cool, the fans would turn off and the card would go sick.  This forces that card to always have the fans at least at 30% speed)
--temp-target 76
--gpu-vddc 1.025 (yes, undervolted to 1.025 and running smoothly)

Both cards are currently averaging about 5% rejects with those settings.  I'll even link ya to the sgminer thread in case anyone hasn't heard of this wonderful version of cgminer yet.

http://coinmyne.proboards.com/thread/24/sgminer-compiled-version-download

Can anyone direct me to a place where I can ask some config questions? I got some 280x's in and up and running using the settings I have seen posted around but I am not getting anywhere near the hash rate that they are claiming. I'm not sure if that is because I use GUIMiner-scrypt and Afterburner or not. I have yet to figure out how to successfully set up CGminer with more than 1 gpu.

I would post it here but I don't think that this is the forum for it. Thanks!
newbie
Activity: 27
Merit: 0
Is it true that you have to subtract the reject rate from the BTC/Mhs? I hash at .9Mh/s and my profits look pretty much like 90% of the rate the website says... taking another 10% out of that seems like a lot.
newbie
Activity: 2
Merit: 0
Hi, I've started mining on CleverMining.com about 3 hours ago and have a doubt about my hashrate.
Could you please look at this picture and tell me if it ok or not?
Because it looks like ~22% of rejects and average hashrate ~2.3 MH/s while my real average hashrate in cgminer is 2.9 MH/s.
My BTC is 17yY3vmdPPueEXJHZaLJA2zsqvWcifR2LQ.
Thank you.

http://upyourpic.org/images/201312/4dycgdarxa.jpg
newbie
Activity: 32
Merit: 0
I m not coming back until we have an EU server
member
Activity: 79
Merit: 10
Can anyone direct me to a place where I can ask some config questions? I got some 280x's in and up and running using the settings I have seen posted around but I am not getting anywhere near the hash rate that they are claiming. I'm not sure if that is because I use GUIMiner-scrypt and Afterburner or not. I have yet to figure out how to successfully set up CGminer with more than 1 gpu.

I would post it here but I don't think that this is the forum for it. Thanks!
newbie
Activity: 23
Merit: 0
I'm getting a lower reject rate even at my max intensity (18) lately, and profitability is well above LTC as usual too. Glad to see the kinks worked out, good work Terk and team!
hero member
Activity: 588
Merit: 500
Get ready for PrimeDice Sig Campaign!
Hash rate still accurate, and rejects went down to 3% suddenly. Did you change anything in the last 20 minutes???
hero member
Activity: 798
Merit: 1000
The recent changes have made my rejects go from 3-4% up to over 7% on average now...
Likely because of the server being moved to CA. If you are east coast based it would only cause more latency issues, as it did for me. I see on average 20-30% loss, which is insane. I want to mine here but having to worry about constant spikes in loss is not worth it. I havent seen a single pool with that much loss, ever, not matter what coin is being mined.

Region may have less to do with that than you think in this case.
I'm also east coast based (NJ/metro NY area) and I get 6.5% rejects:

hero member
Activity: 588
Merit: 500
Get ready for PrimeDice Sig Campaign!
Hash rate is extremely accurate, roughly +-2%. My rejects are at 8.2%
newbie
Activity: 47
Merit: 0
I have been monitoring the packets from the startum a bit, and I found out that sometimes the pool gives you the same job in a row and thats why there are many rejects.

Here is also my log from cgminer :

 [19:56:24] Rejected 4fb672da Diff 822/512 GPU 1 Pool 0 (Job '3' not found)
 [19:56:31] Rejected 5860ba1b Diff 742/512 GPU 1 Pool 0 (Job '3' not found)
 [19:56:33] Rejected 1647199e Diff 2.94K/512 GPU 0 Pool 0 (Job '3' not found)

Basicly its the same job and it was handed out 3 times.
If you can have a look at this, it might decrease the reject ratio.
hero member
Activity: 798
Merit: 1000
Hey

I haven't mined on clevermining for a few days but there is still a bit of btc sitting waiting to be sent to me

can you send me whats left?

1KkfPxwQTsTawfuFgPxn78DuVvdJUxpcvv

thanks

"Immature   0.00006564 BTC
Unexchanged   0.00114007 BTC
Ready For Payout   0.00916648 BTC
Total Expected   0.01037219 BTC"

so, about .01 BTC Smiley thanks.

Once your "ready to payout" reaches 0.01BTC, it will payout automatically.

quick question.

Are the rejects calculated in the btc/1mh estimate or should i subtract the 16-20% reject i`m getting. ?

Coolb2

You must subtract it yourself.

Any Idea why my stats page is showing about 50% of my actual hasrate?  Should I be worried bout this?

What's your username? I'll take a look.
sr. member
Activity: 308
Merit: 250
Any Idea why my stats page is showing about 50% of my actual hasrate?  Should I be worried bout this?

 I have 3 cards all hashing at 920 with ~5% rejects and the stats page shows 1.1Mh with 14% reject?  And it has for the last 20 mins.  an hour or so ago it showed the correct value.

 Thoughts?
sgk
legendary
Activity: 1470
Merit: 1002
!! HODL !!
I'm working on EU and Asia servers to launch and split the load. Current server is overloaded with all the traffic/hashpower it got. Stay tuned!

Kudos. Will really like to join back once the Asia server is up and running.
newbie
Activity: 8
Merit: 0
Hey

I haven't mined on clevermining for a few days but there is still a bit of btc sitting waiting to be sent to me

can you send me whats left?

1KkfPxwQTsTawfuFgPxn78DuVvdJUxpcvv

thanks

"Immature   0.00006564 BTC
Unexchanged   0.00114007 BTC
Ready For Payout   0.00916648 BTC
Total Expected   0.01037219 BTC"

so, about .01 BTC Smiley thanks.
newbie
Activity: 9
Merit: 0
quick question.

Are the rejects calculated in the btc/1mh estimate or should i subtract the 16-20% reject i`m getting. ?

Coolb2
full member
Activity: 208
Merit: 100
Reject rate: 3.22%
Hash rate: 730 Kh/s
WU: 665/m
Elapsed ming time: 8hrs
Location: Australia

Sgminer v4.1
--expiry 1 --queue 1 --scan-time 1 --kernel zuikkis
member
Activity: 84
Merit: 10
The recent changes have made my rejects go from 3-4% up to over 7% on average now...
Likely because of the server being moved to CA. If you are east coast based it would only cause more latency issues, as it did for me. I see on average 20-30% loss, which is insane. I want to mine here but having to worry about constant spikes in loss is not worth it. I havent seen a single pool with that much loss, ever, not matter what coin is being mined.
newbie
Activity: 27
Merit: 0
The recent changes have made my rejects go from 3-4% up to over 7% on average now...
full member
Activity: 156
Merit: 100
Finally got a setup that was stable and well performing for my measly little rig. anybody running 270s can find my config a few post back.

Smiley

although i've swapped back to Waffle just to top up my bounty to the minimum payment lever then i'l;l switch back and leave it there.
Jump to: