[Mining OS] SimpleMining.net - Manage Your GPU farm the easy way! (30 days free) - page 291.

elgar

newbie

Activity: 2

Merit: 0

Hello! I have a rig of six RX570 cards. One of them is MSI rx570 armor 4Gb. - When I try to overclock, it lowers hashrate. Even when I put default setting for the memory clock (1750) for this card, it doesn't change it. When I don't put any values in the overclocking section, it gives me the default hashrate 22-23 Mhs. All other cards give me hashrates of 28-29 Mhs when overclocked. Is there a way to make this card to give me higher hashrates in simplemining os? In Windows 10 I get 28 Mhs out of this MSI card.

wl04

newbie

Activity: 3

Merit: 0

Hello guys! I need advice from experienced SMOS users. Atm im trying to migrate to SMOS from Windows 10 and everything is perfect but the performance. My rigs are based on bios modded RX570's and under Win 10 I can pull 30mh/s but on SMOS after all my attempts I can't go higher than 26.5mh/s.

My Claymore settings are:

Quote

-wd 1 -r 1 -epool stratum+tcp://eth-eu.dwarfpool.com:8008 -ewal $walletETH/$rigName -esm 0 -epsw x -allpools 1 -mport -3333 -asm 1 -powlim 30 -mode 1 -ethi 16 -dcri 10

and my Overclocking settings are:

Quote

Core: 1100, mem 2100, undervolt 985, powerstage 7

Can anyone help me with configuration?
Also no matter what I set as core cloak it shows 1041 Mhz in monitoring... also power stage doesn't seem to work? Is there a solution or Pimp /EthOS is the way to go?

ledio

newbie

Activity: 39

Merit: 0

Can anyone give me .bat for EWBF mining BTG on supernova? Problem is supernova have username and password to login on pool

c-none

full member

Activity: 210

Merit: 100

Quote from: logicassets on November 20, 2017, 02:09:57 PM

Quote from: c-none on November 20, 2017, 08:28:48 AM

Quote from: logicassets on November 20, 2017, 08:15:48 AM

Quote from: c-none on November 19, 2017, 12:18:26 PM

Quote from: deg026 on November 19, 2017, 09:16:09 AM

Quote from: c-none on November 19, 2017, 09:05:16 AM

SMOS is constantly resetting miner and rig after installing 7th GPU.

Any ideas? How to fix this issue?

It was working fine with 4 GPUs but when I plugged 7 in total, it's resetting the GPUs constantly.

Any help is appreciated, thanks a lot!

replace risers
in 90% - help!
have 6 rigs with differents gpus fom 8 to 12 each

many times i constcuct new rigs, i have situation as you describe - at the end always solutions was - replace risers or replace pci-e splitter

LOL same risers work under Windows.

LOL the same risers under Windows you're complaining about in the MSI Afterburner thread? Tongue

Quote from: c-none on November 16, 2017, 12:08:21 PM

Hi there, I am having a weird issue.

I have Win10 installed and fully updated to latest stable one.
On this rig I use 7 x 1080TI cards however a few hours later I start the windows, some GPUs randomly drops from MSI Afterburner and becomes uncontrollable like in the image.

Image: https://ibb.co/ciFZ3R

You can see that 1st GPU dropped now. It happens randomly and this is really boring.

Anyone can have a solution for me?

Thanks a lot.

So you genius guy think MSI Afterburner issue is related to risers? Cheesy

So you think it's not? Cool

Yes it's not related to risers, because I've fixed the issue now and everything works perfect, LOL.

mfsmarques

member

Activity: 65

Merit: 10

Quote from: DunePilot on November 20, 2017, 05:23:44 PM

Quote from: slajfo on November 20, 2017, 04:31:04 PM

Today i tried XMR-Stak-AMD for Electroneum and connection works, also with ClaymoreXMR.. but i had it little bit unstable on my 6x RX 580 rig with SMOS so i go back to Claymore-ETH.

Edit: is there some news about VEGA support in future releases?

I got SGMiner and ClaymoreXMR working with my RX 580s but the ClaymoreXMR was very unstable no matter what settings I did... it got much better hashrate but was not stable at all. You went back to Claymore ETH to mine ETH stuff or you got it working for Electroneum too?

Do you or anyone else know how to run 2 threads with SGMiner in SM OS?

You would typically do the following in windows

"rawintensity": "512",
"worksize": "4",
"gpu-threads": "2"

I tried -g 2 to try to get it use 2 threads but it didn't work so I'm just doing raw 1008 worksize 8 threads 1

To use 2 threads in sgminer, download the new beta version of SMOS.

http://download.simplemining.net/beta/

dawidt

jr. member

Activity: 54

Merit: 10

nice work Tytanick, best mining OS ever made.

best regards

DunePilot

newbie

Activity: 32

Merit: 0

Quote from: slajfo on November 20, 2017, 04:31:04 PM

Today i tried XMR-Stak-AMD for Electroneum and connection works, also with ClaymoreXMR.. but i had it little bit unstable on my 6x RX 580 rig with SMOS so i go back to Claymore-ETH.

Edit: is there some news about VEGA support in future releases?

I got SGMiner and ClaymoreXMR working with my RX 580s but the ClaymoreXMR was very unstable no matter what settings I did... it got much better hashrate but was not stable at all. You went back to Claymore ETH to mine ETH stuff or you got it working for Electroneum too?

Do you or anyone else know how to run 2 threads with SGMiner in SM OS?

You would typically do the following in windows

"rawintensity": "512",
"worksize": "4",
"gpu-threads": "2"

I tried -g 2 to try to get it use 2 threads but it didn't work so I'm just doing raw 1008 worksize 8 threads 1

naeme18720

sr. member

Activity: 290

Merit: 250

Quote from: slajfo on November 20, 2017, 04:31:04 PM

Today i tried XMR-Stak-AMD for Electroneum and connection works, also with ClaymoreXMR.. but i had it little bit unstable on my 6x RX 580 rig with SMOS so i go back to Claymore-ETH.

Edit: is there some news about VEGA support in future releases?

Hi
Please share confight xmr stake for amd in os

naeme18720

sr. member

Activity: 290

Merit: 250

Quote from: twofreckles on November 20, 2017, 04:33:21 PM

Quote from: naeme18720 on November 20, 2017, 04:04:02 PM

hi

please please please

confight softward XMR-Stak-AMD in site

http://pool.electroneum.space/#getting_started

write this here for simplemining.net OS

please please

i can not connection...

Most probably you couldn't connect because it was done. I faced the same problem and at the end just connected to:
https://easyhash.io

Ok
Please

confight softward XMR-Stak-AMD in site
https://easyhash.io
I want for used OS this code
Please help for code mining in xmr stake amd

twofreckles

sr. member

Activity: 366

Merit: 250

Quote from: naeme18720 on November 20, 2017, 04:04:02 PM

hi

please please please

confight softward XMR-Stak-AMD in site

http://pool.electroneum.space/#getting_started

write this here for simplemining.net OS

please please

i can not connection...

Most probably you couldn't connect because it was done. I faced the same problem and at the end just connected to:
https://easyhash.io

slajfo

newbie

Activity: 4

Merit: 0

Today i tried XMR-Stak-AMD for Electroneum and connection works, also with ClaymoreXMR.. but i had it little bit unstable on my 6x RX 580 rig with SMOS so i go back to Claymore-ETH.

Edit: is there some news about VEGA support in future releases?

naeme18720

sr. member

Activity: 290

Merit: 250

hi

please please please

confight softward XMR-Stak-AMD in site

http://pool.electroneum.space/#getting_started

write this here for simplemining.net OS

please please

i can not connection...

Blynda

newbie

Activity: 11

Merit: 0

Hello can anyone share their overcloack settings on rx 580 8gb ? Because all i can get is 28.5 mh/s and almost 140w from wall each card, i think it's too much power consumption , because on windows I was able to something like 120w .

logicassets

newbie

Activity: 49

Merit: 0

Quote from: c-none on November 20, 2017, 08:28:48 AM

Quote from: logicassets on November 20, 2017, 08:15:48 AM

Quote from: c-none on November 19, 2017, 12:18:26 PM

Quote from: deg026 on November 19, 2017, 09:16:09 AM

Quote from: c-none on November 19, 2017, 09:05:16 AM

SMOS is constantly resetting miner and rig after installing 7th GPU.

Any ideas? How to fix this issue?

It was working fine with 4 GPUs but when I plugged 7 in total, it's resetting the GPUs constantly.

Any help is appreciated, thanks a lot!

replace risers
in 90% - help!
have 6 rigs with differents gpus fom 8 to 12 each

many times i constcuct new rigs, i have situation as you describe - at the end always solutions was - replace risers or replace pci-e splitter

LOL same risers work under Windows.

LOL the same risers under Windows you're complaining about in the MSI Afterburner thread? Tongue

Quote from: c-none on November 16, 2017, 12:08:21 PM

Hi there, I am having a weird issue.

I have Win10 installed and fully updated to latest stable one.
On this rig I use 7 x 1080TI cards however a few hours later I start the windows, some GPUs randomly drops from MSI Afterburner and becomes uncontrollable like in the image.

Image: https://ibb.co/ciFZ3R

You can see that 1st GPU dropped now. It happens randomly and this is really boring.

Anyone can have a solution for me?

Thanks a lot.

So you genius guy think MSI Afterburner issue is related to risers? Cheesy

So you think it's not? Cool

c-none

full member

Activity: 210

Merit: 100

Quote from: logicassets on November 20, 2017, 08:15:48 AM

Quote from: c-none on November 19, 2017, 12:18:26 PM

Quote from: deg026 on November 19, 2017, 09:16:09 AM

Quote from: c-none on November 19, 2017, 09:05:16 AM

SMOS is constantly resetting miner and rig after installing 7th GPU.

Any ideas? How to fix this issue?

It was working fine with 4 GPUs but when I plugged 7 in total, it's resetting the GPUs constantly.

Any help is appreciated, thanks a lot!

replace risers
in 90% - help!
have 6 rigs with differents gpus fom 8 to 12 each

many times i constcuct new rigs, i have situation as you describe - at the end always solutions was - replace risers or replace pci-e splitter

LOL same risers work under Windows.

LOL the same risers under Windows you're complaining about in the MSI Afterburner thread? Tongue

Quote from: c-none on November 16, 2017, 12:08:21 PM

Hi there, I am having a weird issue.

I have Win10 installed and fully updated to latest stable one.
On this rig I use 7 x 1080TI cards however a few hours later I start the windows, some GPUs randomly drops from MSI Afterburner and becomes uncontrollable like in the image.

Image: https://ibb.co/ciFZ3R

You can see that 1st GPU dropped now. It happens randomly and this is really boring.

Anyone can have a solution for me?

Thanks a lot.

So you genius guy think MSI Afterburner issue is related to risers? Cheesy

logicassets

newbie

Activity: 49

Merit: 0

Quote from: c-none on November 19, 2017, 12:18:26 PM

Quote from: deg026 on November 19, 2017, 09:16:09 AM

Quote from: c-none on November 19, 2017, 09:05:16 AM

SMOS is constantly resetting miner and rig after installing 7th GPU.

Any ideas? How to fix this issue?

It was working fine with 4 GPUs but when I plugged 7 in total, it's resetting the GPUs constantly.

Any help is appreciated, thanks a lot!

replace risers
in 90% - help!
have 6 rigs with differents gpus fom 8 to 12 each

many times i constcuct new rigs, i have situation as you describe - at the end always solutions was - replace risers or replace pci-e splitter

LOL same risers work under Windows.

LOL the same risers under Windows you're complaining about in the MSI Afterburner thread? Tongue

Quote from: c-none on November 16, 2017, 12:08:21 PM

Hi there, I am having a weird issue.

I have Win10 installed and fully updated to latest stable one.
On this rig I use 7 x 1080TI cards however a few hours later I start the windows, some GPUs randomly drops from MSI Afterburner and becomes uncontrollable like in the image.

Image: https://ibb.co/ciFZ3R

You can see that 1st GPU dropped now. It happens randomly and this is really boring.

Anyone can have a solution for me?

Thanks a lot.

c-none

full member

Activity: 210

Merit: 100

I think I will skip to PiMP after this no-support from SMOS.

tpd09

full member

Activity: 287

Merit: 100

@Dev are you planning to add any new optimized miners for Nvidia?

edit: nevermind, just read tytanick response.

Dhino

jr. member

Activity: 41

Merit: 1

Your OS is great.

Presently I have 18 rigs on SMOS. I am facing two problems.

1) My internet connection become very slow after connecting 18 rigs to SMOS. Do I need to increase my bandwidth(My present internet: Xfinity Performance ,Download: 25 Mbps, Upload : 5 Mbps) or change router? I want to put more rigs on SMOS after solving the internet issue.

2) I have two rigs on RX series of SMOS. One rig RAM has just died and other rig RAM is also showing the same symptoms. Does it has anything to do with my OC setting. Present setting are (Core MHz:1050, Memory MHz: 1750, Core Unvervolting: 920, Powerstage : 4)

Any help is appreciated, thank you.

c-none

full member

Activity: 210

Merit: 100

Quote from: deg026 on November 19, 2017, 09:16:09 AM

Quote from: c-none on November 19, 2017, 09:05:16 AM

SMOS is constantly resetting miner and rig after installing 7th GPU.

Any ideas? How to fix this issue?

It was working fine with 4 GPUs but when I plugged 7 in total, it's resetting the GPUs constantly.

Any help is appreciated, thanks a lot!

replace risers
in 90% - help!
have 6 rigs with differents gpus fom 8 to 12 each

many times i constcuct new rigs, i have situation as you describe - at the end always solutions was - replace risers or replace pci-e splitter

LOL same risers work under Windows.

Topic: [Mining OS] SimpleMining.net - Manage Your GPU farm the easy way! (30 days free) - page 291. (Read 836205 times)